• +0 80794 52016
  • victorsales@vsnl.net

PRODUCTS RANGE

Expand All | Contact All

RO Antiscalant

Pioneers in the industry, we offer RO Antiscalant Chemicals GENESOL LF from India.

RO Low Antiscalant Genesys AP

Approx Price: Rs 250 / Kilogram
Minimum Order Quantity: 50 Kilogram

Product Details:

  • Types : Low pH, Antiscalant Chemical , Membrane Antiscalant
  • Grade Standard : Industrial Grade , Chemical Grade , Pharmaceutical Grade
  • Form : Liquid
  • Packaging Type : Can

Description Genesys Ap Has Been Developed As A Broad Spectrum Antiscalant For Use In Reverse Osmosis And Nano-filtration Systems.it Is Highly Effective At Preventing Calcium Carbonate Scale Formation Andiron Fouling Thus Reducing The Frequency Of Membrane Cleaning And Replacement.

Genesys Ap Has Been Proven To Be Effective At A Langelier Saturation index Of +2.6 Allowing Systems To Be Designed And Operated At Higher recovery Rates. Significant Capital And Consumable Cost Savings Can Bemade By Reducing The Amount Of Feed Water Needed And Reject Water Fordisposal.

Application genesys Ap Should Be Dosed Continuously To The Feed Water Upstream Ofthe Cartridge Filter. Typical Feed Water Dose Rates Are 2-4 Mg/l.the Optimum Dosage Rate Can Be Calculated Using The Genesys Membrane Master® Software. Genesys Ap Can Be Diluted And Is Fully Miscible With Water In All Proportions.

Health And Safety enesys Ap Is An Aqueous Solution Of Phosphonic Acid, Classified As Nontoxic.genesys Ap Is Corrosive To Carbon Steel So All Pumps, Pipe-workand Tanks Should Be Made From Acid Resistant Materials.a Material Safety Data Sheet Is Available On Request.

Classification chip : Irritant | Un : Corrosive typical Properties appearance : Pale Coloured Liquid ph As Supplied : 1.8 – 2.0specific Gravity : 1.14 – 1.16freezing Point :


Genesy LF RO Antiscalant NSF

Approx Price: Rs 350 / Kilogram
Minimum Order Quantity: 25 Kilogram

Product Details:

  • Types : High pH, High Silica Inhibition, Antiscalant Chemical , Membrane Antiscalant
  • Grade Standard : Industrial Grade , Technical Grade , Chemical Grade , Pharmaceutical Grade
  • Form : Liquid
  • Packaging Size : 25
  • Packaging Type : Can

Description Genesys LF has beendeveloped as a broad spectrum liquid antiscalant for use in Reverse Osmosis andNano-filtration systems. It is effective at preventing inorganic scale, particularly calcium carbonate, iron and silica thus reducing the frequency of membrane replacement and cleaning.

Genesys LF has proven to be effective at a Langelier Saturation Index(LSI) of +2.6 which means that systems can be designed and operated at their optimum recovery rates By reducing the amount of feed waterused and concentrate to be discharged, significant savings can be madeto both capital and operational costs.

Application Guide Genesys LF should be dosed continuously to the feed water upstream of the cartridge filters.Typical dosage rates are 2 – 5 mg/L.The optimum dosage rate can be calculated using the Genesys Membrane Master® software. Genesys LF can be diluted and is fully miscible with water in all proportions.


 

Sodium Hypochlorite

Approx Price : Rs 12,000.00 / Metric Ton
Minimum Order Quantity: 1 Metric Ton

Our Sodium Hypo Chloride is most renowned as due to its quality and purity. We offer these sodium hypo chloride in most special range to our valuable clients. This is formulated by the NAOCL under the various stringent quality tests by using the latest technology. We are appreciated by our clients as delivering the products on time in most effective manner. These are used in various requirements like bleaching, disinfection, water treatment and many more.

Features:

  • Cost effective
  • Highly reactive

Deals in cities : Kolkata, Bihar, Orissa, Jharkhand, Chattisgarh, Assam, Tripura, Sikkim, Meghalya, Mizoram.

Additional Information:
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Western Union
  • Port of Dispatch: kolkata
  • Packaging Details: 30/50kgs jar

 

Chlorine Tablets

Approx Price: Rs 320 / kg
Minimum Order Quantity: 5 kg

Chlorination of water is one of the worldwide-accepted method of disinfection and purification of water to make it potable. For inexpensive, economical and timely purification of drinking water, under the various schemes of protected water supply in rural areas, Chlorine Tablets are highly effective. This is the easiest method of disinfection and purification of water.

Uses of Chlorine Tablets:

  • Chlorine provides a strong residual in the distribution system.
  • Chlorine is easy to apply.
  • Chlorine is a relatively inexpensive disinfecting agent.
  • Chlorine is effective at low concentrations.

Applications:

  • It is used for disinfecting of Drinking water, Industrial residue and Pool cleaning.
  • Due to its decolorizing property it is used in whitening of vegetable fibers like cotton, linen etc. and of paper pulp.
  • Chlorination of water is one of the worldwide-accepted method of disinfection and purification of water to make it potable. For inexpensive, economical and timely purification of drinking water, under the various schemes of protected water supply in rural areas, Chlorine Tablets are highly effective. This is the easiest method of disinfection and purification of water.
  • Uses of Chlorine Tablets :
  • Chlorine provides a strong residual in the distribution system.
  • Chlorine can be easily converted to chloramines that also provide a strong residual and do not produce by-products.
  • Chlorine is easy to apply.
  • Chlorine is a relatively inexpensive disinfecting agent.
  • Chlorine is effective at low concentrations.
    Applications :
  • It is used for disinfection of portable drinking water.
  • It is used for disinfecting of Industrial residue and Pool cleaning.
  • Due to its decolorizing property it is used in whitening of vegetable fibers like cotton, linen etc. and of paper pulp.

Available Tablet Size :

  • 3.5gm
  • 7gms

Deals in cities : Kolkata, Bihar, Orissa, Jharkhand, Chattisgarh, Assam, Tripura, Sikkim, Meghalya, Mizoram.


 

Sodium Meta Bisulphite

Sodium Meta Bisulphate occurs in the form of white crystalline powder in nature. This is highly pure, has the ash content and extreme moisture. These chemicals are used in various requirements such as in leather industry as a depilatory agent of lime, in textile industry for dying and bleaching and in food industry act as anti-fermentative and preservative. Our clients can avail these chemical in accordance to their requirements.

Features:

  • Anti –fermentative
  • Preservative
  • Reactive
  • Cost effective

 

RO Antiscalant Genesys Lf

Approx Price: Rs 350 / kg
Minimum Order Quantity: 25 kg

Description: Genesys LF has been developed as a broad spectrum liquid antiscalant for use in Reverse Osmosis and Nano-filtration systems. It is effective at preventing inorganic scale, particularly calcium carbonate, iron and silica thus reducing the frequency of membrane replacement and cleaning.

Genesys LF has proven to be effective at a Langelier Saturation Index (LSI) of +2.6 which means that systems can be designed and operated at their optimum recovery rates By reducing the amount of feed water used and concentrate to be discharged, significant savings can be made to both capital and operational costs.

Deals in cities : Kolkata, Bihar, Orissa, Jharkhand, Chattisgarh, Assam, Tripura, Sikkim, Meghalya, Mizoram.


 

Genesol 32 (Biocidal Cleaner/Preservative)

DescriptionGenesol 32 is a broadspectrumbiocide for use incleaning Reverse Osmosis andNano-Filtration systems. It can beused both on and off-line to eliminatemicrobiological fouling but when used inpotable water applications, Genesol 32should be used ‘off-line’.Genesol 32 can be used in pre-treatment systemsFor the prevention of biofouling in pumps, tanks and pipe-work. It isdeactivated to harmless by-products by using sodium bisulphite.

ApplicationWhen cleaning fouled membranes ‘off-line’, Genesol 32 should be dosedat 1,000-1,500mg/L for 6-8 hours. Following use, the membranes shouldbe flushed and cleaned using an alkaline detergent such as Genesol 36 orGenesol 40. When used ‘on-line’ Genesol 32 should be dosed at700-1000 mg/L for 8-12 hours once every 5 to 21 days depending on theseverity of the fouling.Genesol 32 has good biostatic properties and can be used for membranepreservation and storage. Dose levels depend on the length ofanticipated storage using the following guidelines:24-36 hours 300mg/l = 0.036-168 hours 500mg/l = 0.05%1-4 weeks 800mg/l = 0.08%1-6 months 1000mg/l = 0.1%>6 months drain & refill every 6 monthsGenesol 32 can be diluted and is fully miscible with water in allproportions.

Health and SafetyGenesol 32 is an aqueous solution is corrosive to carbon steel and certainother alloys so all pumps, pipe-work and tanks should be made from acidresistant material. A material safety data sheet is available on request.

Classification
CHIP: Corrosive | UN: Corrosive

PackagingAvailable in 25 Kgs, 50 Kg carbouys and 200 Kgs Drums.The shelf life is 12 months under normal storage conditions.

  1. Suitable for Reverse Osmosis (RO) and Nano-Filtration (NF) membranes.
  2. Effective against most micro-organisms
  3. Long lasting
  4. Compatible with all polyamide membranes
  5. Easily deactivated to harmless by-products
  6. Can be used to clean pretreatment systems
  7. Can be used for membrane preservation and storage

Typical properties Appearance : white/yellow liquidpH as supplied : 4.0 – 6.0Specific gravity : 1.04 - 1.09Freezing point : < - 1°C


 

Genesol 34 (Alkaline Chelant Cleaner)

Description : Genesol 34 is a blended chelating agent and non-ionic surfactant and has been developed as a alkaline generalpurposecleaner for membrane systems. Genesol 34 will help to remove organic and inorganic based deposits and is effective against iron fouling. Genesol 34 is classified as ‘readily biodegradable’ and is an excellent adjunct when used in combination with other Genesol membrane cleaners.

Application : Genesol 34 should be used as a 3% solution at the highest pH recommended by the membrane manufacturer and should be alternately soaked and recycled through the membrane system for at least 3-4 hours. Working with enhanced temperature is strongly recommended to improve the cleaning performance. Cleaning solutions using Genesol 34 have a tendency to foam. After cleaning, the membrane system should be thoroughly flushed out, until the pH values the feed and the concentrate sides of the membrane are the same.
Genesol 34 can be diluted and is fully miscible with water in all proportions.

Health and Safety : Genesol 34 is an aqueous solution acid and a non-ionic surfactant. It is compatible with carbon steel and commonly used materials of construction. A material safety data sheet is available on request.

ClassificationCHIP: Not Classified | UN: Non Hazardous

PackagingAvailable in 25 Kgs, 50 Kg carbouys and 200 Kgs Drum. The shelf life is two years under normal storage conditions.

  1. Suitable for Reverse Osmosis (RO) and Nano-Filtration (NF) membranes
  2. Effective against both organic and inorganic deposits.
  3. Effective against iron fouling
  4. Compatible with all polyamide membranes
  5. Can be used in combination with other Genesol cleaners
  6. Classified as ‘readily biodegradable.

Typical propertiesAppearance : colourless to pale liquidpH as supplied: 11.0 – 11.2Specific gravity: 1.33 - 1.35Freezing point: < - 0°C


 

Genesol 36 (Alkaline Cleaner)

Description : Genesol 36 is a generalpurpose cleaner for the removal of organic foulants found on Reverse Osmosis and Nanofiltration membrane surfaces. The low dose rate of Genesol 36 ensures cost effective use and it is an excellent adjunct when used in combination with other Genesol membrane cleaners.

Application : Genesol 36 should be used as a 1-2% solution at the highest pH recommended by the membrane manufacturer and should be alternately soaked and recycled through the membrane system for at least 3-4 hours. Working with enhanced temperature will also improve the cleaning performance. Cleaning solutions using Genesol 36 have a tendency to foam. After cleaning, the membrane system should be thoroughly flushed out, until the pH values of the feed and the discharge are the same and all residual traces of Genesol 36 have been removed. Genesol 36 can be diluted and is fully miscible with water in all proportions.

Health and Safety : Genesol 36 is an anionic surfactant. It is compatible with carbon steel and commonly used materials of construction.A material safety data sheet is available on request.

Classification : CHIP: Irritant | UN: Non Hazardous

Packaging :
Available in 25 Kgs, 50 Kg carbouys and 200 Kgs Drums.The shelf life is two years under normal storage conditions.

  1. Suitable for Reverse Osmosis (RO) and Nano-Filtration (NF) membranes
  2. Effective against organic deposits
  3. Compatible with all polyamide membranes
  4. Approved for use in potable water applications
  5. Liquid product, easy to use
  6. Can be used in combination with other Genesol cleaners
  7. Cost effective low dose treatment
Typical properties
Appearance: pale yellowliquidpH as supplied: 7 – 8Specific gravity: 1.01 - 1.03Freezing point: < - 5°C

 

Genesol 38 (Weakly Acidic Membrane Cleaner)

Description : Genesol 38 has been developed as an inorganic scale cleaner and iron deposit remover for use in Reverse Osmosisand Nano-filtration membrane systems. Used at the right concentration, its self adjusting pH ensures highest solubility ofiron salts is achieved.Genesol 38 has been approved for use in drinking water applications.

Application : Genesol 38 is highly effective when used as a 3-4% solution and alternately soaked and recycled through the membrane system for 1-2 hours. When using Genesol 38, the cleaning solution pH will stabilise at pH 3.7. If the pH increases above pH 4.2 during the cleaning process, the solution should be discarded and replaced with a fresh solution. It is recommended that the membranes be cleaned at 25-30ºC. Membrane manufacturers guidelines should be followed at all times. After cleaning, Genesol 38 cleaning solutions should be neutralised to pH 6-8 with an alkaline solution before discharge as the presence of low pH solutions can be damaging to concrete and cement lined discharge pipes. Before returning the plant to service, the membrane system should be thoroughly flushed, until the pH values of the feed and the concentrate ends of the system are the same. The product water conductivity may initially be high but will revert to normal after a few hours operation Genesol 38 ccan be diluted and is fully miscible with water in all proportions.

Health and Safety : Genesol 38 is an aqueous solution combined with a non-ionic biodispersant that is classified as non-toxic. It is corrosive to carbon steel therefore all chemical tanks, pumps and pipe-work must be made from acid-resistant materials.A material safety data sheet is available on request.

Classification : CHIP: Not Classified | UN: Non Hazardous

Packaging : Available in 25 Kgs, 50 Kg carbouys and 200 Kgs Drums. Shelf life 2 years under normal storage conditions.

  1. Suitable for use in Reverse Osmosis (RO) and Nano-Filtration (NF) membranes
  2. Effective against inorganic deposits
  3. Preferred product for removing iron deposits
  4. Self adjusting pH ensures optimum solubility of iron salts
  5. Drinking water approval
  6. Compatible with both polyamide and cellulose acetate membranes
  7. Effective against aluminium based foulants

Typical properties Appearance: clear strawcolouredliquidpH as supplied: 3.5 – 4.0Specific gravity: 1.18 - 1.20Freezing point: < - 0°C


 

Genesol 40 (Alkaline Cleaner)

Description : Genesol 40 has been developed as a general-purpose membrane cleaner effective against organic based foulants typically found in Reverse Osmosis and Nano-filtration membrane systems. Genesol 40 has been approved for use in drinkingwater applications.

Application : Genesol 40 is highly effective when used as a 2-3% solution at the highest pH recommended by the membrane manufacturer. The cleaning solution should be alternately soaked and recycled through the membrane system for at least 4-6 hours. Working with enhanced temperature will also improve the cleaning performance. After cleaning, the membrane system should be thoroughly flushed out, until the pH of the feed and the concentrate ends of the system are the same. Cleaning solutions using Genesol 40 have a tendency to foam. Genesol 40 can be diluted and is fully miscible with water in all proportions.

Health and Safety : Genesol 40 is an aqueous blend of mixed cleaners, including a surfactant, fully biodegradable sequestrant and inorganic phosphate. It is compatible with carbon steel and commonly used materials of construction. A material safety data sheet is available on request.

Classification : CHIP: Corrosive | UN: Corrosive

Packaging : Available in 25 Kgs, 50 Kg carbouys and 200 Kgs Drums. The shelf life is 2 years under normal storage conditions. Genesol 40 should be stored at >10ºC, as precipitation may occur at lower temperatures. Precipitated matter will readily re-dissolve when Genesol 40 is warmed.

  1. Suitable for use in Reverse Osmosis (RO) and Nano-Filtration (NF) membranes
  2. Effective against a wide range of organic foulants
  3. Drinking water approval
  4. Liquid product, easy to use
  5. Efficacy against Clay and Colloidal Silica fouling
Typical properties Appearance: pale yellowliquidpH as supplied: 13.0Specific gravity: 1.12 - 1.24Freezing point: < - 0°C

 

Genesol 50 (Alkaline Chelant Cleaner)

Description : Genesol 50 is based on a chelating agent and has been developed as a general-purpose membrane alkaline cleaner for use with Reverse Osmosis and Nanofiltration membranes. Genesol 50 will remove organic and inorganic based deposits. It is effective against iron fouling and many forms of calcium scale and is an excellent adjunct when used in combination with other Genesol membrane cleaners.

Application : Genesol 50 is highly effective when used as a 2-3% solution at the highest pH recommended by the membrane manufacturer and should be alternately soaked and recycled through the membrane system for at least 3-4 hours. Working with enhanced temperature will also improve the cleaning performance. After cleaning, the membrane system should be thoroughly flushed out, until the pH values of the feed and the discharge are the same. Genesol 50 can be diluted and is fully miscible with water in all proportions.

Health and Safety :
Genesol 50 is a formulation containing of different acid. It is compatible with carbon steel and commonly used materials of construction. A material safety data sheet is available on request.

Classification : CHIP: Irritant | UN: Corrosive

Packaging : Available in 25 Kgs, 50 Kg carbouys and 200 Kgs DrumsThe shelf life is two years under normal storage condition.

  1. Suitable for Reverse Osmosis (RO) and Nano- Filtration (NF) membranes
  2. Effective against a wide range of organic foulants
  3. Effective against iron fouling and inorganic based deposits
  4. Used in a wide range of applications
  5. Compatible with all polyamide membranes
  6. Can be used in combination with other Genesol cleaners
  7. Liquid product, easy to use
Typical properties Appearance: pale yellowliquidpH as supplied: 13.0Specific gravity: 1.29 - 1.31Freezing point: < - 0°C

 

Genesol 703 Membrane Cleaner (Alkaline Powder)

Description : Genesol 703 has been developed as a general-purpose membrane cleaner for an extensive range of organic based foulants found in Reverse Osmosis and Nano-filtration membrane systems. Genesol 703 is particularly effective against aluminium silicate, which can be difficult to remove With conventional cleaners.

Application : Genesol 703 is highly effective when used as a 2 - 3% solution at the highest pH permitted by the membrane manufacturer. Genesol 703 should be alternately soaked and recycled through the membrane system for 4 - 6 hours. Cleaning with warm cleaning solutions will considerably improve the cleaning performance. After cleaning, the membrane system should be thoroughly flushed out, until the pH values of the feed and the concentrate are the same.Cleaning solutions using Genesol 703 have a tendency to foam. Genesol 703 is fully miscible with water in all proportions.

Health and Safety : Genesol 703 is a powder blend of mixed cleaners, including a surfactant, fully biodegradable sequestrant and inorganic phosphate. It is compatible with carbon steel and commonly used materials of construction. A material safety data sheet is available on request.

Classification :
CHIP: Corrosive | UN: Corrosive

Packaging : Available in 25 Kgs, 50 Kg carbouys and 200 Kgs Drums. The shelf life is two years under normal storage conditions. Ensure the drums remain well sealed and the Genesol 703 remains dry.

  1. Cost effective
  2. Compatible with all
  3. polyamide membranes
  4. Powdered Product
  5. Removes most organic and inorganic deposits
  6. Removes aluminium silicate
  7. Effective against most organic based foulants
  8. Excellent for alkaline prewash
  9. Good silica efficacy
Typical properties Appearance: white powderpH of a 2%solution: 12.0Specific gravity: not applicableFreezing point: not applicable

 

Genesys LF60 (Broad Spectrum Antiscalant)

Description : Genesys LF60 has been developed as a broad spectrum antiscalant for use in brackish water Reverse Osmosis and Nano-Filtration systems. It is highly effective at preventing the formation of inorganic scale thereby reducing the frequency ofmembrane cleaning and replacement. Genesys LF60 allows systems to be designed and operated at their optimum recovery rates, reducing the amount of feed water used and concentrate to be discharged. Consequently significant savings can be made with both capital and operational costs.

Application : Genesys LF60 should be dosed continuously to the feed water upstream of the cartridge filters. Typical dosage rates are 4-8 mg/l. The optimum dosage rate can be calculated using the Genesys Membrane Master® software. Genesys LF60 can be diluted and is fully miscible with water in all proportions.

Health and Safety : Genesys LF60 has been classified as safe to use in potable water applications. Genesys LF60 is compatible with carbon steel and all commonly used materials of construction. A material safety data sheet is available on request.

Classification : CHIP: Not Classified | UN: Non Hazardous

Typical properties :
Appearance: pale coloured liquid pH as supplied: 9.7 – 10.3Specific gravity: 1.13 – 1.15 Freezing point: <-2ºC

Packaging :
Available in 25 Kgs, 50 Kg carbouys and 200 Kgs Drum.Genesys LF60 shelf life is two years under normal conditions of storage

  1. Suitable for use in Reverse Osmosis (RO) and Nano-Filtration (NF) membranes
  2. Excellent iron fouling inhibitor
  3. Compatible with all polyamide membranes
  4. Allows high recovery rates
  5. Drinking water approval
  6. Negligible impact on AOC levels
  7. Replaces acid addition
  8. Inhibits common scales
  • Calcium carbonate/sulphate
  • Barium/strontium sulphate
  • Silica
  • Calcium phosphate
  • Iron & manganese

 

Genesol 30 (Membrane Biocide)

Description : Genesol 30 is a fast acting, broad-spectrum biocide used for cleaning Reverse Osmosis and Nano- Filtration membranes. It can be used both on and off-line to eliminate microbiological fouling. When used in potable water applications, Genesol 30 should be used ‘off-line’. Genesol 30 is also effective in removing biofilm from pumps, tanks and pipe-work. Best results are obtained when Genesol 30 is used at a pH 5.5 – 7.0. Residual Genesol 30 can be deactivated to harmless byproductsby using sodium bisulphate. Genesol 30 is readily biodegraded in the environment; the degradation rate is enhanced at increasing pH and temperature.

Application : When used ‘off-line’ as a membrane cleaner, Genesol 30 should be dosed at 300 mg/L for periods up to 60 minutes. Following use, the membranes should be flushed and cleaned using an alkaline detergent such as Genesol 40 or Genesol 703. When used ‘on-line’ in non-potable applications Genesol 30 should be dosed at 400mg/l for 30 minutes. Genesol 30 can be diluted and is fully miscible with water in all proportions.

Health and Safety : Genesol 30 is based on an organo compound. It is corrosive to carbon steel and certain other alloys so all pumps, pipe-work and tanks should be made from acid resistant materials. A material safety data sheet is available on request.

Classification : CHIP: Harmful | UN: Corrosive

Packaging : Available in 25 Kgs, 50 Kg carbouys and 200 Kgs Drum. The shelf life of Genesol 30 is 12 months when stored in a cool place. At ambient temperatures above 20ºC the shelf life of Genesol 30 may be Significantly reduced.

  1. Suitable for use in Reverse Osmosis (RO) and Nano- Filtration (NF) membranes
  2. Effective against most micro-organisms
  3. Fast acting – short contact time needed
  4. Compatible with all polyamide membranes
  5. Easily deactivated to harmless by-products
  6. Can be used to clean pre-treatment systems
Typical properties Appearance: pale orangeliquidpH as supplied: 3.5 – 4.5Specific gravity: 1.24 - 1.26Freezing point: < - 20°C

 

Genesys BS (Barium Sulphate Anti-scalant)

Description : Genesys BS has been developed as an anti-scalant for use in Reverse Osmosis and Nano- Filtration systems using natural and process feed-waters with particularly high levels of barium sulphate and calcium carbonate. It is also effective against other common scaling species. The strong threshold properties exhibited by Genesys BS against barium sulphate enable membrane systems to be operated at their optimum recovery rate. This reduces the amount of feed water needed and thevolume of reject water for disposal. Consequently, significant capital and consumable cost savings can be made.

Application : Genesys BS should be dosed continuously to the feed water upstream of the cartridge filter. Typical dosage rates are 3-5 mg/l. Genesys International staff will provide advice on the most suitable dose rate for a particular water analysis. Genesys BS can be diluted and is fully miscible with water in all proportions. Solutions of Genesys BS should beprepared daily.

Health and Safety : Genesys BS is a non-hazardous, and it is compatible with carbon steel and commonly used materials of construction.A material safety data sheet is available on request.

Typical properties : Appearance: pale clear liquid
pH as supplied: 6.8 – 7.2
Specific gravity: 1.19 – 1.21Freezing point: < - 0ºC

Classification : CHIP: Not Classified | UN: Non Hazardous

Packaging : Available in 25 Kgs, 50 Kg carbouys and 200 Kgs Drums. Shelf life 12 months under normal conditions of storage.

  1. Suitable for Reverse Osmosis (RO) and Nano-Filtration (NF) membranes
  2. Compatible with all polyamide membranes
  3. Allows high recovery rates
  4. Simple test method
  5. Inhibits common scalants
  • Barium/strontium sulphate
  • Calcium sulphate
  • Magnesium hydroxide
  • Silica

 

Genesys CAS Calcium Sulphate Antiscalant

Description : Genesys CAS has been developed as an antiscalant for use in Reverse Osmosis and Nano-Filtration systems operatingwith feed-waters containing high levels of calcium sulphate. Genesys CAS is alsoeffective against calcium carbonate and other commonly found scaling species. The strong threshold properties shown by Genesys CAS against calcium sulphate and calcium carbonate enable membrane systems to be operated at their optimum recovery rate. This reduces the amount of feed water needed and the volume of concentrate requiring disposal. Consequently, significant savings can be made with both capital and operational costs.

Application : Genesys CAS should be dosed continuously to the feed water upstream of the cartridge filter. Typical dosage rates are 3-5mg/l. The optimum dosage rate can be calculated using the Genesys Membrane Master® software. Genesys CAS can be diluted and is fully miscible with water in all proportions.

Health and Safety : Genesys CAS is a non-hazardous is fully compatible with carbon steel and commonly used materials of construction.A material safety data sheet is available on request.

Typical properties :
Appearance: pale clear liquidpH as supplied: 8.4 – 8.6Specific gravity: 1.32 – 1.34Freezing point: < - 0ºC

Classification : CHIP: Not Classified | UN: Non Hazardous

Packaging : Available in 25 Kg kgs and 250 Kg drums,The shelf life is 12 months under normal storage conditions.


 

Genesys DS Broad Spectrum Anti-scalant

Description : Genesys DS has been developed as a broad spectrum antiscalant for use in small Reverse Osmosis and Nano-Filtration systems with less than 50M3/day of feed water flow. It is effective in preventing formation of calcium carbonate and all common scaling species. It’s effectiveness at a single dose rate means that detailed water analysis is not necessary.Genesys DS will continue to give maximum membrane protection even when water analyses and operating conditions change.

Application : Genesys DS should be dosed continuously to the feed water upstream of the cartridge filter and should be diluted with good quality water.The standard feed water dose rate of Genesys DS is 25 mg/L.

Health and Safety : Genesys DS is an aqueous solution is concentrated form, Genesys DS is corrosive to carbon steel so all dosing pumps, storage tanks and pipework should be constructed of acid resistant material. A material safety data sheet is available on request.

Classification : CHIP: Irritant | UN: Corrosive

Typical properties Appearance: pale colourless liquidpH as supplied: 1.8 – 2.2Specific gravity: 1.02 – 1.05Freezing point: <-3ºC

Packaging : Available in 25 Kg kegs and 200 Kg drums.Shelf life 18 months under normal conditions of starage.

  1. Suitable for Reverse Osmosis and Nano-Filtration membranes
  2. Compatible with all types of polyamide membrane
  3. Allows high recovery rates
  4. Replaces acid addition
  5. Simple test method
  6. Inhibits common scalants
  • Calcium carbonate/sulphate
  • Barium/strontium sulphate
  • Calcium phosphate
  • Iron/manganese

 

Genesys DW (Antiscalant for Sulphate Removal Systems)

Description : Genesys DW has been developed as an antiscalant for membrane systems used in Sulphate Removal Plant in the offshore oil industry. It is highly effective at preventing all common inorganic scales, including calcium, barium and strontium sulphate, calcium carbonate and calcium fluoride. Genesys DW is registered by CEFAS for use in the offshore industry and is compatible with the DOW Filmtec® SR90-400 membrane.

Application : Genesys DW should be dosed continuously to the feed water upstream of the cartridge filter. Typical dosage rates are 1-2 mg/L. Genesys DW can be diluted and is fully miscible with water in all proportions.

Health and Safety : Genesys DW is an aqueous solution and is compatible with carbon steel and all commonly used materials of construction.A material safety data sheet is available on request.

Classification : CHIP: Not Classified | UN: Non Hazardous

Typical properties Appearance: straw coloured liquidpH as supplied: 9.8 – 10.2Specific gravity: 1.32 - 1.34Freezing point: < - 5°C

Packaging : Available in 25 Kg kegs, 250 Kg drums and 1,300 Kg IBC’s. Shelf life 2 years under normal conditions of storage.

  1. Developed for use in the offshore oil industry as an antiscalant for SRP membranes
  2. Registered by CEFAS with OCNS approval
  3. Compatible with DOW Filmtec® SR90-400 membrane
  4. Effective at LSI up to +2.8
  5. Allows membrane systems to operate at higher rates of recovery
  6. Inhibits Common Scalants
  • Calcium carbonate/sulphate
  • Barium/strontium sulphate
  • Silica
  • Magnesium hydoroxide
  • Iron/Manganese

 

Genesys HR Sea-water Anti-scalant

Description : Genesys HR has been developed as an anti-scalant for use in large sea-water Reverse Osmosis and Nano-Filtration systems. It is a concentrated product used at low dose rate. By inhibiting all scaling species it allows systems to be designed and operated at high recovery rates. By reducing the amount of feed water needed and reject water requiring disposal significant capital and operating cost savings can be made.

Application : Genesys HR should be dosed continuously to the feed water upstream of the cartridge filter. Typical dosage rates are 0.4-0.8 mg/L. The optimum dosage rate can be calculated using the Genesys Membrane Master® software. Genesys HR can be diluted and is fully miscible with water in all proportions.

Health and Safety : Genesys HR is a concentrated solution of phosphonic acid that is classified as safe to use in potable water applications. Genesys HR is corrosive to carbon steel so all dosing pumps, storage tanks and pipework should be constructed of acid resistant material. A material safety data sheet is available on request.

Classification : CHIP: Corrosive | UN: Corrosive

Typical properties Appearance: clear liquidpH as supplied: 1.8 – 2.0Specific gravity: 1.14 – 1.16Freezing point: <-5ºC

Packaging :Available in 25 Kg kegs, 200 Kg drums and 1,100 Kg IBC’s. The shelf life is two years under normal conditions of storage

  1. Suitable for Reverse Osmosis (RO) and Nano- Filtration (NF) membranes
  2. Compatible with all types of polyamide membrane
  3. Particularly effective in high pressure systems working at 60-65% recovery
  4. Drinking water approval
  5. Highly cost effective alternative to SHMP
  6. Inhibits common scalants
  • Calcium carbonate/sulphate
  • Barium/strontium sulphate
  • Silica
  • Magnesium hydoroxide
  • Iron/manganese

 

Genesys PHO (Calcium Phosphate Antiscalant)

Description : Genesys PHO has been developed specifically to prevent calcium phosphate and calcium carbonate scaling in ReverseOsmosis and Nano-Filtration systems. Genesys PHO permits system operation at higher pH and recovery than otherantiscalants. By reducing the amount of feed water needed, reject water for disposal and acid for pH control significant capital and operating cost savings can be made.

Application : Genesys PHO should be dosed continuously to the feed water upstream of the cartridge filter. The dose rate of Genesys PHO is based on the calcium and phosphate content of the concentrate stream, as well as pH, temperature and ionic strength. Genesys staff will be pleased to provide advice on the most suitable dose rate for a particular water analysis and set of operating conditions. Genesys PHO can be diluted and is fully miscible with water in all proportions

Health and Safety : Genesys PHO is a non-hazardous, compatible with carbon steel and other commonly used materials of construction. A material safety data sheet is available on request.

Typical properties Appearance: pale clear liquidpH as supplied: 6.0 – 6.4Specific gravity: 1.30 – 1.32

Classification : CHIP: Not Classified | UN: Non Hazardous

Packaging : Available in 25 Kgs, 50 Kg carbouys and 200 Kgs Drums.The shelf life of Genesys PHO is 2 years under normal storage conditions.

  1. Suitable for Reverse Osmosis (RO) and Nano-Filtration (NF) membranes
  2. Compatible with all types of polyamide membranes
  3. Replaces acid addition
  4. Allows high recovery rates
  5. Simple Test Method
  6. Inhibits common scalants
  • Calcium carbonate/sulphate
  • Barium/strontium sulphate
  • Calcium phosphate
  • Silica

 

Genesys RC (Antiscalant for Recycle Systems)

Description : Genesys RC has been developed as a broad spectrum antiscalant and antifoulant for use in small and recycling ReverseOsmosis and Nano-Filtration systems with less than 100 M3/day of feed water flow. Genesys RC is effective at preventing all inorganic scale formation thus reducing the frequency of membrane cleaning and replacement. Genesys RC allows systems to be designed and operated at higher recovery rates. By reducing the amount of feed water needed and concentrate for disposal, capital and operating cost savings can be made.

Application : Genesys RC should be dosed continuously to the feed water upstream of the cartridge filter. Typical dosage rates are 7 - 15mg/l. The optimum dosage rate can be calculated using the Genesys Membrane Master® software. Genesys RC can be diluted and is fully miscible with water in all proportions.

Health and Safety: Genesys RC is a synergistic blend of whose active components have been classified as non-toxic and are widely used in drinking water applications. Genesys RC is compatible with carbon steel and all commonly used materials of construction. A material safety data sheet is available on request.

Typical properties Appearance: pale amber liquidpH as supplied: 10.9 – 11.1Specific gravity: 1.08 – 1.12Freezing point: <-0ºC

Classification : CHIP: Not Classified | UN: Non Hazardous

Packaging : Available in 25 Kgs, 50 Kg carbouys and 200 Kgs Drums. The shelf life two years under normal conditions of storage.

  1. Suitable for Reverse Osmosis (RO) and Nano-Filtration (NF) membranes
  2. Compatible with all types of polyamide membrane
  3. Allows high recovery rates
  4. Replaces acid addition
  5. Simple test method
  6. Inhibits common scalants
  • Calcium carbonate/sulphate
  • Barium/strontium sulphate
  • Calcium phosphate
  • Magnesium hydroxide
  • Iron/manganese

 

Genesys SI (Silica Antiscalant/Antifoulant)

Description : Genesys SI has been developed as an antifoulant for use in Reverse Osmosis and Nano- Filtration systems operating on high silica feed-waters. Genesys SI is also effective against all common scale forming salts such as calcium carbonate, calcium, barium and strontium sulphate. By reducing silica fouling and inhibiting all forms of scaling, Genesys SI allows OEMS to design systems that can operate at higher recovery rates, reducing the amount of feed water used and the volume of concentrate to be discharged. Consequently, significant savings can be made in capital and operating costs.

Application : Genesys SI should be dosed continuously to the feed water upstream of the cartridge filters. Typical dosage rates are 2-5mg/l. The optimum dosage rate can be calculated using the Genesys Membrane Master® software. Genesys SI can be diluted and is fully miscible with water in all proportions.

Health and Safety : Genesys SI is a non-hazardous. Genesys SI is not aggressive to carbon steel and other commonly used materials of construction. A material safety data sheet is available on request.

Classification : CHIP:Not Classified | UN: Non Hazardous

Typical properties Appearance: pale amber liquidpH as supplied: 9.8 – 10.2Specific gravity: 1.21 – 1.23Freezing point: < - 5ºC

Packaging : Available in 25 Kgs, 50 Kg carbouys and 200 Kgs Drums. Shelf life is twelve months under normal conditions of storage.

  1. Suitable for Reverse Osmosis (RO) and Nano- Filtration (NF) membranes
  2. Drinking water approval
  3. Compatible with all polyamide membranes
  4. Replaces acid addition
  5. Allows high recovery rates
  6. Simple test method
  7. Inhibits common scaling species
  • silica
  • calcium carbonate/sulphate
  • barium/strontium sulphate
  • calcium phosphate
  • iron & manganese

Genesys SW (Sea-water Antiscalant)

Description : Genesys SW has been developed as a broad spectrum antiscalant for use in sea-water Reverse Osmosis and Nano-Filtration systems. It is highly effective at preventing the formation of inorganic scale thereby reducing the frequency of membrane cleaning and replacement. Genesys SW allows systems to be designed and operated at their optimum rate of recovery, reducing the amount of feed water used and concentrate to be discharged. Consequently significant cost savings can be made with both capital and operational costs.

Application : Genesys SW should be dosed continuously to the feed water upstream of the cartridge filter. Typical dosage rates are 1.0-1.5 mg/L. The optimum dosage rate can be calculated using the Genesys Membrane Master® software. Genesys SW can be diluted and is fully miscible with water in all proportions.

Health and Safety : Genesys SW is an aqueous solution and has been registered for use in drinking water applications.Genesys SW is compatible with carbon steel and all commonly used materials of construction. A material safety data sheet is available on request.

Classification : CHIP: Not Classified | UN: Non Hazardous

Typical properties Appearance: pale yellow liquidpH as supplied: 8.4 – 8.6Specific gravity: 1.15 – 1.17Freezing point: <-0ºC

Packaging : Available in 25 Kg kegs, 200 Kg drums and 1,150 Kg IBCs. The ‘shelf life’ is two years under normal conditions of storage.

  1. Suitable for use in Reverse Osmosis(RO) and Nano-Filtration(NF) membranes
  2. Compatible with all types of polyamide membrane
  3. Particularly effective in high pressure systems working at 50-60% recovery
  4. Drinking water approval
  5. Replaces acid addition
  6. Highly cost effective alternative to SHMP
  7. Inhibits common scales
  • Calcium carbonate
  • Calcium phosphate
  • Calcium sulphate

 

Genesys WB Broad Spectrum Antiscalant

Description :Genesys WB has been developed as a broad spectrum antiscalant for use in very small Reverse Osmosis and Nano-Filtration systems using less than 30 M3/day feed water. It is ideal for Towns Mains (Tapwater) or other feed waters where small quantities of residual chlorine may be present. It is particularly effective in preventing calcium carbonate formation and is also effective against all commonly found scaling species. It’s effectiveness at a single dose rate means that a detailed water analysis is not necessary. Genesys WB will continue to give maximum protection even when water analyses and operating conditions change.

Application : Genesys WB should be dosed continuously to the feed water upstream of the cartridge filter and should be diluted with good quality water. The standard feed water dose rate is 50 mg/L.

Health and Safety :Genesys WB is an aqueous solution of phosphonic acid. It is compatible with carbon steel and all commonly used materials of construction. Amaterial safety data sheet is available on request.

ClassificationCHIP: Not Classified | UN: Non Hazardous

Typical properties Appearance:

  • pale colourless liquid
  • pH as supplied: 6.0 – 6.5
  • Specific gravity: 1.08 – 1.10
  • Freezing point: <-2ºC

Packaging : Available in 25 Kg kegs and 200 Kg drums. Shelf life 12 months under normal storage conditions.

  1. Suitable for Reverse Osmosis (RO) and Nano-Filtration (NF) membranes
  2. Compatible with all types of polyamide membrane
  3. Allows high recovery rates
  4. Replaces acid addition
  5. Simple test method
  6. Inhibits common scalants
  • Calcium carbonate/sulphate
  • Barium/strontium sulphate
  • Calcium phosphate
  • Iron/manganese


Genetech CP (Corrosion Inhibitor)

Description : Genetech CP has been developed as a corrosion inhibitor for use with product water from Reverse Osmosis systemsas well as naturally soft waters.

Application : Genetech CP should be dosed continuously to the product water. Corroded systems should be cleaned with a suitable cleaner before being treated with a passivation dose of 40-60 mg/L of Genetech CP for a period of 6-10 weeks.Following passivation, a standard dose rate of 20 - 25mg/l of Genetech CP is typical, dependent upon the metallurgy of the system. Genetech CP can be diluted and is fully miscible with water in all proportions.

Health and Safety : Genetech CP is an aqueous solution, is compatible with carbon steel and commonly used materials of construction. A material safety data sheet is available on request.

ClassificationCHIP: Corrosive | UN: Non Hazardous

Typical properties Appearance:

  • slightly hazy liquid
  • pH as supplied: 11.4 – 11.6
  • Specific gravity: 1.22 - 1.24
  • Freezing point: < - 1°C

Packaging : Available in 25 Kgs, 50 Kg carbouys and 200 Kgs Drums. Shelf life two years under normal storage conditions.