• +0 80794 52016
  • victorsales@vsnl.net

PRODUCTS RANGE

Expand All | Contact All

Cooling Tower Water Treatment Chemicals

Prominent & Leading Wholesale Distributor from Kolkata, we offer Aquatreat-194 Antiscalant And Dispersant, Aqua Treat 388 Biocleaning Agent And Biocide, Aqua Treat 399 Biocleaning Agent And Biocide, Aqua Treat 727 Oil Dispersant, Aquatreat 792 Acid Inhibitor and Aquatreat 941 Scale Sludge Conditioner.

Aquatreat-194 Antiscalant And Dispersant

DESCRIPTION AND USE : AquaTreat-194 is an all-organic blend of antiscalants and polymeric dispersants to provide excellent control over mineral foulants in industrial evaporative cooling water systems. Besides preventing scale formation and deposition, it also helps remove existing scales, when used under specified conditions. It provides excellent control over iron fouling. It prevents orthophosphates precipitation and reconditions it to afford synergistic corrosion control. It contains specific yellow metal corrosion inhibitor that has excellent stability. It is effective over a wide range of pH.When used with corrosion inhibitors like AquaTreat-2501. It affords total control over corrosion, scaling and non-biological fouling. Water treated with AquaTreat-194 is safe to discharge in effluent.

GENERAL SPECIFICATIONS : Appearance Clear yellow liquid
Wt./ml: 1.0 to 1.1pH (1% soln. in distilled water): Acidic 

APPLICATION AND DOSAGE :
AquaTreat-194 exhibits scale control properties by threshold inhibition, sequestration and crystal distortion. Coupled with the strong dispersants in the product, it provides excellent inhibition and dispersion of all mineral scales, dirt, dust, silt etc. and keeps the heat transfer surfaces clean. The effective dose levels depend upon factors like water characteristics, fouling potential, other inhibitors used and other system specifics. It can tolerate hardness at high levels in the system even upto 1500 ppm as CaCO3 permitting operations at high recycle level. It is non-toxic and non-polluting at use levels. AquaTreat-194 must be fed continuously to ensure that recommended levels of residuals are maintained at all times. The product should be fed neat from the container through equipment using non-corrosive components like PP, PE, PVC or Teflon. Our field experts will help you in designing suitable dosing arrangement for your system.

HANDLING AND STORAGE : Avoid contact with eyes and prolonged contact with skin. Do not take internally. In case of contact with eyes, flush with ample water and get prompt medical attention. Gloves and goggles should be used where appropriate. AquaTreat-194 containers should be stored airtight under shade and away from direct sunlight. PACKING: AquaTreat-194 is available in 50 liters HDPE carbouys/200 liters HDPE drums.


Aqua Treat 388 Biocleaning Agent And Biocide

DESCRIPTION AND USE : AquaTreat-388 is a broad-spectrum biocide with a very strong bio-dispersing property. It is effective in badly fouled systems, as it not only destroys bacterial colonies but also flushes out the slime and bio films. It is low foaming and effective over a wide range of pH.

GENERAL SPECIFICATIONS : Appearance: Clear colorless to pale yellow liquidWt/ml: 0.9 – 1.1 @ 30 0 CpH (as is): AcidicSolubility: Soluble in water

APPLICATION AND DOSAGE : The dose levels depend upon the microbial load in the system. The product generally performs well at a dose level of 30-75 ppm. For precleaning and to clean badly fouled system higher dose may be required.  AquaTreat-388 is readily miscible with water and is not affected by pH of the system. The product is applied neat and dosed at a point where good mixing can be ensured. It is recommended to stop water losses and give a minimum contact time of 10-12 hrs for best results. After this contact time, flush the system to remove dead and dislodged biomass. Water treated with the product is safe for discharge.

FEEDING:AquaTreat-388 can be directly fed from the container into the basin, or at any other point where good mixing can beensured. No special feeding equipment is necessary.

HANDLING:

  • quaTreat-388 may cause skin and eye irritation.
  • It is harmful if taken internally. In case of contact, flush the affected area with plenty of water.
  • In case of prolonged contact, flush with plenty of water and get prompt medical attention.
  • In case of ingestion, induce vomiting by administering warm salt water or any other emetic and get medical attention.
  • Contaminated clothing should be thoroughly washed before reuse. Use of protective rubber gloves is recommended during handling of AquaTreat-388

ENVIRONMENTAL CAUTION:Do not use in potable water systems or where contamination of potable water may occur. In cooling water systems, AquaTreat-388 is slowly hydrolyzed to non-toxic products. Most of these products are volatile and are stripped off from the system, thus posing no effluent problems.

PACKING:AquaTreat-388 is available in 50 liters HDPE carbouys/200 liters HDPE drums.


 

Aqua Treat 399 Biocleaning Agent And Biocide

DESCRIPTION AND USE: AquaTreat-399 is specially designed for industrial cooling water system where biological activity is high causing biofilm and biomass generation. It is effective in pulling out the biofilm and biomass out of the system due to its high surface-active property. AquaTreat-399 is based on an organic compound and causes no pollution problem at use levels and conditions. The product when applied affords excellent bio-cleaning of the system.

GENERAL SPECIFICATIONS: Appearance: Clear pale yellow liquidWt/ml: 1.0 to 1.15 @ 30 0 CpH (As is): Acidic < 6Solubility: Soluble in water

APPLICATION AND DOSAGE: The dose levels depend upon the foulant and microbial load in the system. The product generally performs well at a use level of 30-75 ppm. For precleaning and badly fouled system higher dose may be required. AquaTreat-399 is readily miscible with water and is not affected by pH of the system.The product is applied neat and dosed at a point where good mixing can be ensured. It is recommended to stop water losses and provide a minimum contact time of 8 -12 hrs for best results. After this contact time, flushing is advised.

FEEDING:AquaTreat-399 can be directly fed from the container into the basin of the cooling water system or at any other point where good mixing can be assured. No special feeding equipment is necessary.

HANDLING:

  • AquaTreat-399 may cause skin and eye irritation.
  • It is harmful if taken internally.
  • In case of contact, flush the affected area with plenty of water.
  • In case of prolonged contact, flush with plenty of water and get prompt medical attention.
  • In case of ingestion, induce vomiting by administering warm salt water or any other emetic and get medical attention.
  • Use of protective rubber gloves is recommended while handling AquaTreat-399

ENVIRONMENTAL CAUTION:Do not use in potable water systems or where contamination of cooling water may occur in potable water systems. AquaTreat-399 is slowly hydrolyzed to non-toxic products. Most of these products are volatile and are stripped off from the system, thus posing no effluent problems.

PACKING:AquaTreat-399 is packed in 50 liters HDPE carbouys/200 liters HDPE drums.


 

Aqua Treat 727 Oil Dispersant

DESCRIPTION AND USE:Aqua Treat 727 is useful in dispersing and removing oil & grease from cooling water systems. The product is also used as a precleaning agent for removing oil, grease and other loose deposits from new systems. This helps in providing a clean surface for the formation of an uniform protective corrosion inhibitor film. Addition of Aqua Treat 727 is also recommended to clean up cooling water systems contaminated by oil ingress. Aqua Treat 727 emulsifies oil and helps its removal through blow down and overflows.

GENERAL SPECIFICATIONS:Appearance: Clear liquidSolubility: Soluble in waterpH (10 % soln.in distilled water): 6.5 -7.5Wt/ml: 1.0 – 1.15Odor: Characteristic

APPLICATION AND DOSAGE:The product needs to be fed neat at a point where thorough mixing can be ensured. The water losses/blow down is to be kept at the minimum to provide maximum contact time. During the process, turbidity and suspended particles may rise which needs to be removed out of the system by thorough flushing. The process needs to be repeated in case of heavy oil contamination. The optimum dose will depend upon system specifics and Wex Technologies representative will help you select the right dose levels for your system.

HANDLING AND STORAGE:

  • Avoid contact with eyes or prolonged contact with skin.
  • Do not take internally.
  • In case of contact with skin, wash with plenty of water.
  • In case of contact with eyes, flush with water & get prompt medical attention. Gloves & goggles should be used when appropriate.
  • The same should be stored under shade & should not be exposed to direct sunlight.

PACKINGAqua Treat 727 is available in 50 liters HDPE carboys/ 200 liters drums.


 

Aquatreat 792 Acid Inhibitor

DESCRIPTION AND USE:quaTreat 792 is an organic acid inhibitor. It is recommended for use during low pH cleaning of a system.The product forms immediate protective film on bare metal when the deposits/scales are dissolved by acid and thus protects the surface from acid attack.

GENERAL SPECIFICATIONS: Appearance: Clear to hazy reddish brown liquid.pH (As Is): AcidicWt/ml: 0.95 -1.05 @ 30 'CSolubility: Soluble in waterOdor : Characteristic

APPLICATION AND DOSAGE: During the process of low pH cleaning, the product is to be dosed along with acid at a level of 1 to 2% of acid quantity. The product needs to be used neat.In case of accidental low pH condition, a slug dose of about 1 to 5 ppm of product based on hold up is recommended to control the damage due to low pH condition.

HANDLING AND STORAGE:

  • Avoid contact with eyes or prolonged contact with skin. Do not take internally.
  • In case of contact with skin, wash with plenty of water.
  • In case of contact with eyes, flush with water & get prompt medical attention.
  • Gloves & goggles should be used when appropriate.
  • AquaTreat 792 should be stored under shade & should not be exposed to direct sunlight.

PACKING:Aqua Treat 792 is available in 50 liters HDPE carboys/ 200 liters HDPE drums.


 

Aquatreat 941 Scale Sludge Conditioner

DESCRIPTION AND USE: AquaTreat 941 is a synergistic blend of inorganic phosphate designed for the control of corrosion and scale in High pressure boiler internals. AquaTreat 941 provides co-ordinate phosphate ratio of 2.6-2.8:1, for Boiler operating up to (2000 psig), 110 kg.cm2) The specific corrosion inhibitors in AquaTreat 941 provide corrosion protection by the formation of a protective passive film on the metal surfaces.

GENERAL SPECIFICATIONS:Appearance: Clear colorless to paleyellow liquid.pH (As Is) : 7.0 – 9.5Wt/Ml: 1.25 -1.40 @ 30 0 C

TREATMENT AND DOSAGE:AquaTreat 941 can be dosed directly without dilution. Normally a phosphate reserve is maintained in the boiler water. The proper treatment levels vary with factors like boiler systems, operating conditions, boiler pressure and water characteristics. The product characteristics and viscosity permit easy feeding by on-line dosage pumps. The desired feeding mode is continuous injection to feed water.

PRODUCT BENEFITS:

  • Affords excellent corrosion protection.
  • Prevents deposition of hardness salts.
  • Ensures high mobility of phosphate sludge.
  • Good dispersion of suspended particulate matter
  • Simple control test.
  • Can be dosed directly without dilution.
  • Compatible with total water treatment programme.
  • Ready to use liquid blend.

HANDLING AND STORAGE:

  • Avoid contact with eyes or prolonged contact with skin.
  • Do not take internally.
  • In case of contact with skin, wash with plenty of water.
  • In case of contact with eyes, flush with plenty of water and seek immediate medical attention.
  • In case of ingestion, wash mouth thoroughly and drink plenty of water.
  • Do not induce vomiting and seek medical attention.
  • Avoid extremes of temperature and wear gloves and goggles wherever appropriate.

PACKING:Available in 50-liter HDPE containers.


 

Aquatreat-1011 Antiscalant and Dispersant

DESCRIPTION AND USE: AquaTreat-1011 is an all-organic blend of antiscalants and polymeric dispersants that provides excellent control over mineral foulants in industrial water systems. It incorporates a synergistic combination of dispersants, threshold inhibitors and crystal distorters to achieve complete control over scaling and fouling. Besides preventing scale formation and deposition, it also helps in removing existing scales, when used under specified conditions. Aqua Treat 1011 also incorporates a non ionic surfactant to enhance its deposit control capability. It not only disperses but also dissolves iron oxide, a product of corrosion and helps keep the surfaces clean. It is effective over a wide range of pH and water treated with AquaTreat-1011 can be safely discharged without any treatment in the effluent.

GENERAL SPECIFICATIONS: Appearance: Clear blue liquidWt/ml: 1.1 to 1.2 @ 30 0 CpH (as is) : 3.5 – 5.0Solubility: Soluble in water

APPLICATION AND DOSAGE: AquaTreat-1011 exhibits antiscaling & antifouling properties. Proper dosage maintenance keeps the heat transfer surfaces clean for optimum heat transfer efficiency. The effective dose levels depend upon factors like water characteristics, fouling potential, other inhibitors used and other system specifics. It is particularly effective in systems with high solids load and keeps nozzles free from deposits in gas scrubbing systems. It is non-toxic and non-polluting at use levels. AquaTreat-1011 must be fed neat & continuously to ensure that recommended levels are maintained at all times. Our field experts will help you in designing suitable dosing arrangement for your system.

  • HANDLING AND STORAGE:Avoid contact with eyes and prolonged contact with skin.
  • Do not take internally.
  • In case of contact with eyes, flush with ample water and get prompt medical attention.
  • Gloves and goggles should be used where appropriate.
  • AquaTreat-1011 containers should be stored airtight under shade and away from direct sunlight.

PACKING:AquaTreat-1011 is available in 50 liters HDPE carbouys/200 liters HDPE drums.


 

AquaTreat-1020 Sludge Conditioner and Scale Inhibitor

DESCRIPTION AND USE : AQUATREAT-1020 is a synergistic blend of inorganic and organic chemicals designed SPECIFICALLY FOR SUGAR INDUSTRY BOILERS for the control of corrosion and scale in boiler internals. The specific corrosion inhibitors in AQUATREAT-1020 provide corrosion protection by the formation of a protective passive film on the metal surfaces.AQUATREAT-1020 also contains powerful threshold inhibitor to prevent scale formation in feed water pipelines and boiler internals. The crystal distorter and specified dispersant incorporated in the product ensures high mobility of the phosphate sludge formed so that it is easily removed by blow down. The dispersant also ensures that suspended particulate matter do not accumulate and are removed by the blow down. AQUATREAT-1020 is compatible with almost all products used in total boiler water treatment program.

GENERAL SPECIFICATIONS : Appearance: Clear colorless to pale yellow liquid pH (As Is): 12- 12.5Wt /Ml: 1.05 min @ 30 'C

APPLICATION AND DOSAGE : AQUATREAT-1020 can be dosed directly without dilution. Normally a phosphate reserve is maintained in the boiler water. Proper treatment levels vary with factors like boiler systems, operating conditions, boiler pressure and water characteristics. The desired feeding mode is continuous injection to feed water. WEX’s engineers shall assist in determining the exact dosage, feeding rate and mode for individual installations. requirement to maintain boiler alkalinity within limits. The treatment levels are normally adjusted as per tests for boiler water alkalinity.

PRODUCT BENEFITS:

  • Affords excellent corrosion protection. Prevents deposition of hardness salts.
  • Ensures high mobility of phosphate sludge.
  • Good dispersion of suspended particulate matter.
  • Simple control test.
  • Can be dosed directly without dilution. Ready to use liquid blend.

HANDLING AND STORAGE:

  • Wear suitable gloves and eye/face protection.
  • Avoid contact with skin and eyes
  • Avoid extremes of temperature.
  • Replace caps securely after use.
  • In case of contact with skin wash well with soap and water.
  • In case of contact with eyes wash immediately with plenty of water for at least 10 minutes.
  • If any irritation persists, seek medical attention.
  • In case of ingestion wash out mouth thoroughly and drink plenty of water.
  • Do NOT induce vomiting. If any discomfort persists, seek medical attention.
  • Recommended maximum storage limit is 2 years.
  • Replace caps securely after use.PACKING:AquaTreat-1020 is available in 50 liters HDPEcontainers.

 

AquaTreat - 1106 Scale Inhibitor

DESCRIPTION : AquaTreat 1106 is an organophosphonate exhibiting multifunctional properties of sequestration, deflocculation, threshold effect and corrosion inhibition in aqueous systems. It exhibits better stability than other phosphonates in high hardness and is more resistant to oxidizing biocides used in water treatment.

SPECIFICATIONS : Appearance: Clear colourless to pale yellow solutionSolubility: Fully water solubleSp. Gravity: 1.35 – 1.45pH (As Supplied): >2Solid Content: 50 - 60%

BENEFITS:

  1. Excellent control over CaCO3,
  2. CaSO4 scaling
  3. Good stability to chlorine and bromine
  4. Easy to dose and monitor
DOSAGE : Dosage will depend on intended use and performance levels desired. Typical dosage ranges from 2 to 10 ppm

HANDLING & PRECAUTIONS : Generally safe but avoid contact with eyes and prolonged contact with skin. AquaTreat 1106 is slightly toxic by ingestion, practically non-toxic on dermal application. Moderately irritating to skin and corrosive to eyes. In case of contact, flush with plenty of water. Personal Protective Equipment including safety glasses, gloves and apron arerecommended when working withconcentrated material.

PACKING : AquaTreat 1106 is supplied in 65 / 275 kg capacity HDPE drums

 

Aqua Treat - 1189 Antiscalant And Dispersant

DESCRIPTION AND USE : AquaTreat-1189 is an all-organic blend of antiscalants and polymeric dispersants to provide excellent control over mineral foulants in industrial evaporative cooling water systems. Besides preventing scale formation and deposition, it also helps in removing existing scales, when used under specified conditions.It contains state of the art latest polymers to exhibits excellent control over iron fouling & provides excellent inhibition of orthophosphate and reconditions it to afford synergistic corrosion control. It permits high levels of hardness salts in water enabling to operate the system at high cycles of concentration. It is effective over a wide range of pH.When used with corrosion inhibitors like AquaTreat-2501 it affords total control over corrosion, scaling and non-biological fouling giving 'OPTIMUM' performance of a system. Water treated with AquaTreat-1189 is safe to discharge in effluent without any pollution problems.

GENERAL SPECIFICATIONS : Appearance: Clear colorless to pale yellow liquidWt/ml : 1.05 to 1.15 @ 30 'CpH (1% soln.in distilled water): Acidic

APPLICATION AND DOSAGE : AquaTreat-1189 exhibits scale control properties by threshold inhibition, crystal distortion and sequestration. In combination with the strong polymers incorporated, it gives inhibition and dispersion of all mineral scales, dirt, dust, silt etc. and keeps the heat transfer surfaces clean. The effective dose levels depend upon factors like hardness, pH, temperature, other water characteristics, fouling potential, other inhibitors used and system specifics. It is recommended for use up to 600-ppm total hardness in the system for best results. It is non-toxic and non-polluting at use levels. AquaTreat-1189 must be fed continuously to ensure that recommended levels of residuals are maintained at all times. The product should be fed neat from the container through equipment using non-corrosive components like PP, PE, PVC or Teflon. Our field experts will help you in designing suitable dosing arrangement for your system.

HANDLING AND STORAGE:

  • Avoid contact with eyes and prolonged contact with skin.
  • Do not take internally.
  • In case of contact with eyes, flush with ample water and get prompt medical attention.
  • Gloves and goggles should be used where appropriate.
  • AquaTreat-1189 containers should be stored airtight under shade and away from direct sunlight.

PACKING:AquaTreat-1189 is available in 50 liters HDPE carbouys/200 liters HDPE drums.


 

Aqua Treat-1190 Antiscalant And Dispersant

DESCRIPTION AND USE:
AquaTreat-1190 is an all-organic blend of antiscalants and polymeric dispersants to provide excellent control over mineral foulants in industrial evaporative cooling water systems. Besides preventing scale formation and deposition, it also helps in removing existing scales, when used under specified conditions. It exhibits excellent control over iron fouling. It also provides excellent inhibition of orthophosphate and reconditions it to afford synergistic corrosion control. It permits high levels of hardness salts in water enabling to operate the system at high cycles of concentration.It is effective over a wide range of pH. When used with corrosion inhibitors like AquaTreat-2501 it affords total control over corrosion, scaling and non-biological fouling giving 'OPTIMUM' performance of a system. Water treated with AquaTreat-1190 is safe to discharge in effluent without any pollution problems.

GENERAL SPECIFICATIONS:Appearance: Clear colorless to pale yello liquidWt/ml: 1.05 to 1.15 @ 30 'CpH (1% soln. in distilled water): Acidic

APPLICATION AND DOSAGE:
AquaTreat-1190 exhibits scale contol properties my threshold inhibition crystal distortion and sequestration. In combination with the strong dispersants incorporated, it gives inhibition and dispersion of all mineral scales, dirt, dust, silt etc. and keeps the heat transfer surfaces clean. The effective dose levels depend upon factors like hardness, pH, temperature, other water characteristics, fouling potential, other inhibitors used and system specifics. It is recommended for use up to 1500-ppm total hardness in the system for best results. It is non-toxic and non-polluting at use levels. AquaTreat-1190 must be fed continuously to ensure that recommended levels of residuals are maintained at all times. The product should be fed neat from the container through equipment using non-corrosive components like PP, PE, PVC or Teflon. Our field experts will help you in designing suitable dosing arrangement for your system

NDLING AND STORAGE: Avoid contact with eye prolonged contact with skin and prolonged contact with skin.
Do not take internally. In case of contact with eyes, flush with ample water get prompt medical attention. Gloves and goggles should be used where appropriate. AquaTreat-1190 containers should be stored airtight under direct sunlight.

PACKING:
AquaTreat-1190 is available in 50 lite


 

Aqua Treat 1191 Antiscalant And Dispersant

DESCRIPTION AND USE : AquaTreat-1191 is an all-organic blend of antiscalants and polymeric dispersants to provide excellent control over mineral foulant in industrial evaporative cooling water systems. Besides preventing scale formation and deposition, it also helps remove existing scales, when used under specified conditions. It provides excellent control over iron fouling. It prevents orthophosphates precipitation and reconditions it to afford synergistic corrosion control. It contains a specific yellow metal corrosion inhibitor that has excellent stability. It is effective over a wide range of pH. When used with corrosion inhibitors like AquaTreat-2501. It affords total control over corrosion, scaling and non-biological fouling. Water treated with AquaTreat-1191 is safe to discharge in effluent.

GENERAL SPECIFICATIONS : Appearance: Clear colorless to pale yellow liquidWt/ml: 1.05 to 1.15 @ 30 0 CpH (1% soln. in distilled water) : Acidic

APPLICATION AND DOSAGE : AquaTreat-1191 exhibits scale control properties by threshold inhibition, sequestration and crystal distortion. Coupled with the strong dispersants in the product, it provides excellent inhibition and dispersion of all mineral scales, dirt, dust, silt etc. and keeps the heat transfer surfaces clean. The effective dose levels depend upon factors likewater characteristics, fouling potential, other inhibitors used and other system specifics. It can tolerate hardness at high levels in the system even upto 600 ppm as CaCO3 permitting operations at high recycle level. It is non-toxic and non-polluting at use levels. AquaTreat-1191 must be fed continuously to ensure that recommended levels of residuals are maintained at all times. The product should be fed neat from the container through equipment using non-corrosive components like PP, PE, PVC or Teflon. Our field experts will help you in designing suitable dosing arrangement for your system.

HANDLING AND STORAGE : Avoid contact with eyes and prolonged contact with skin.

  • Do not take internally.
  • In case of contact with eyes, flush with ample water and get prompt medical attention.
  • Gloves and goggles should be used where appropriate.
  • AquaTreat-1191 containers should be stored airtight under shade and away from direct sunlight.

PACKING:AquaTreat-1191 is available in 50 liters HDPE carbouys/200 liters HDPE drums.


 

Aquatreat 1192 Antiscalant And Dispersant

DESCRIPTION AND USE : AquaTreat-1192 is an all-organic blend of antiscalants and polymeric dispersants to provide excellent control over mineral foulants in industrial evaporative cooling water systems. Besides preventing scale formation and deposition, it also helps remove existing scales, when used under specified conditions. It provides excellent control over iron fouling. It prevents orthophosphates precipitation and reconditions it to afford synergistic corrosion control. It contains specific yellow metal corrosion inhibitor that has excellent stability. It is effective over a wide range of pH. When used with corrosion inhibitors like AquaTreat-2501. It affords total control over corrosion, scaling and non-biological fouling. Water treated with AquaTreat-1192 is safe to discharge in effluent.

GENERAL SPECIFICATIONS : Appearance: Clear colorless to pale yellow liquidWt/ml: 1.05 to 1.15 @ 30 'CpH (1% soln. in distilled water): Acidic

APPLICATION AND DOSAGE : AquaTreat-1192 exhibits scale control properties by threshold inhibition, sequestration and crystal distortion. Coupled with the strong dispersants in the product, it provides excellent inhibition and dispersion of all mineral scales, dirt, dust, silt etc. and keeps the heat transfer surfaces clean. The effective dose levels depend upon factors like water characteristics, fouling potential, other inhibitors used and other system specifics. It can tolerate hardness at high levels in the system even upto 1500 ppm as CaCO permitting operations at high recycle level.It is non-toxic and non-polluting at use levels. AquaTreat-1192 must be fed continuously to ensure that recommended levels of residuals are maintained at all times. The product should be fed neat from the container through equipment using non-corrosive components like PP, PE, PVC or Teflon.

HANDLING AND STORAGE:

  • Avoid contact with eyes and prolonged contact with skin.
  • Do not take internally.
  • In case of contact with eyes, flush with ample water and get prompt medical attention.
  • Gloves and goggles should be used where appropriate.
  • AquaTreat-1192 containers should be stored airtight under shade and away from direct sunlight.

PACKING:AquaTreat-1192 is available in 50 liters HDPE carbouys/200 liters HDPE drums.


 

AquaTreat 1195 H Antiscalant & Dispersant

DESCRIPTION AND USE : AquaTreat 1195 H is an all-organic blend of antiscalants and new generation polymers that provide excellent control over mineral foulants in industrial evaporative cooling water systems. Besides preventing scale formation and deposition, it also helps remove existing scales, when used under specified conditions. It provides excellent control over iron fouling. It prevents orthophosphates precipitation and reconditions it to afford synergistic corrosion control. It contains specific yellow metal corrosion inhibitor that has excellent stability. It is effective over a wide range of pH. It is particularly effective in stressed systems. When used with corrosion inhibitors like AquaTreat-2501. It affords total control over corrosion, scaling and non-biological fouling. Water treated with AquaTreat 1195 H is safe to discharge in effluent.

GENERAL SPECIFICATIONS : Appearance Clear colorless to pale yellow liquidWt/Ml: 1.05 to 1.15pH (1% soln. in distilled water): Acidic

APPLICATION AND DOSAGE : AquaTreat 1195 H exhibits scale control properties by threshold inhibition, sequestration and crystal distortion. Coupled with the high performance polymers in the product, it provides excellent inhibition and dispersion of all mineral scales, dirt, dust, silt etc. and keeps the heat transfer surfaces clean. The effective dose levels depend upon factors like water characteristics, fouling potential, other inhibitors used and other system specifics. It can tolerate hardness at high levels in the system even upto 1500 ppm as CaCO3 permitting operations at high recycle level. It is non-toxic and non-polluting at use levels. AquaTreat 1195 H must be fed continuously to ensure that recommended levels of residuals are maintained at all times. The product should be fed neat from the container through equipment using non-corrosive components like PP, PE, PVC or Teflon. Our field experts will help you in designing suitable dosing arrangement for your system.

HANDLING AND STORAGE : Avoid contact with eyes and prolonged contact with skin. Do not take internally. In case of contact with eyes, flush with ample water and get prompt medical attention. Gloves and goggles should be used where appropriate.AquaTreat 1195 H containers should be stored airtight under shade and away from direct sunlight.

PACKING:AquaTreat 1195 H is available in 50 liters HDPE carbouys/200 liters HDPE drums.


 

Aquatreat 1200 Oxygen Scavenger

DESCRIPTION AND USE : AQUATREAT-1200 is a catalyzed oxygen scavenger for rapid and complete removal of oxygen from boiler water.AQUATREAT-1200 reacts with oxygen present in the boiler water thereby reducing oxygen corrosion. It contains a catalyst to ensure rapid reaction with oxygen. AQUATREAT-1200 is compatible with most chemicals used in boiler water treatment programmes.

GENERAL SPECIFICATIONS : Appearance: Colorless to light YellowishliquidpH (As Is): Alkaline > 9Wt/Ml: 1.05 – 1.15 @ 30 'C

APPLICATION AND DOSAGE : A residual concentration of AQUATREAT-1200 is usually maintained in boiler water. Normally 1 mg/l of oxygen requires 10 mg/l of AQUATREAT-1200 for its removal. However, the right treatment level may vary depending on operating conditions like water characteristics, boiler pressure and feed water temperature. AQUATREAT-1200 is readily soluble in water. Proper feeding can be achieved by dissolving AQUATREAT-1200 in cold clean water, in a covered tank, and introducing the prepared solution into the boiler with on line dosage pumps. Since the solution can absorb oxygen from the atmosphere, not more than one day’s requirement should be prepared at a time. AQUATREAT-1200 is best fed to the boiler feed water pump outlet. In case of systems with deaerator the best point of feed is the deaerator outlet.

PRODUCT BENEFITS :

  • Readily soluble in water.
  • Quick and complete removal of D.O.
  • Simple control tests.

HANDLING AND STORAGE:
Avoid contact with eyes or prolonged contact with skin. Do not take internally. In case of contact with skin, wash with plenty of water. Remove any contaminated clothing. Seek immediate medical attention In case of contact with eyes, flush with plenty of water and seek immediate medical attention. In case of ingestion wash mouth thoroughly and drink plenty of water. DO NOT induce vomiting. Seek immediate medical attention. Wear gloves and goggles wherever appropriate.

PACKING:Available in 50 kg HDPE containers or 200 lit.HDPE barrels.


 

Aquatreat-1522 Antiscalant And Dispersant

DESCRIPTION AND USE:AquaTreat-1522 is an all-organic blend of antiscalants and polymeric dispersants that provides excellent control over mineral foulants in industrial evaporative cooling water systems. It incorporates a synergistic combination of dispersants, threshold inhibitors and crystal distorters to achieve complete control over scaling and fouling. Besides preventing scale formation and deposition, it also helps in removing existing scales, when used under specified conditions. It not only disperses but also dissolves iron oxide, a product of corrosion and helps keep the surfaces clean. It permits higher levels of hardness salts in water enabling operation at high cycles with hard make up water. It is effective over a wide range of pH and water treated with AquaTreat-1522 can be safely discharged without any treatment in the effluent.

GENERAL SPECIFICATIONS:Appearance: Clear colorless to pale yellow liquidWt/ml: 1.0 to 1.1 @ 30 0 CpH (As Is): Acidic

APPLICATION AND DOSAGE:AquaTreat-1522 exhibits antiscaling properties by threshold inhibition, sequestration and crystal distortion. In combination with specific strong dispersants incorporated in the product, it provides inhibiting and dispersing ability of all mineral scales, dirt, dust, silt etc. and keeps the heat transfer surfaces clean for optimum heat transfer efficiency. The effective dose levels depend upon factors like water characteristics, fouling potential, other inhibitors used and other system specifics. It can tolerate hardness at high levels in the system (even up to 1500 as CaCO3).  It is non-toxic and non-polluting at use levels. AquaTreat-1522 must be fed continuously to ensure that recommended levels of residuals are maintained at all times. The product should be fed neat from the container through equipment using non-corrosive components like PP, PE, PVC or Teflon. Our field experts will help you in designing suitable dosing arrangement for your system. 

HANDLING AND STORAGE :

  • Avoid contact with eyes and prolonged contact with skin.
  • Do not take internally.
  • In case of contact with eyes, flush with ample water and get prompt medical attention.
  • Gloves and goggles should be used where appropriate.
  • AquaTreat-1522 containers should be stored airtight under shade and away from direct sunlight.

PACKING : AquaTreat-1522 is available in 50 liters HDPE carbouys/200 liters HDPE drums.


 

Aquatreat-1524 Antiscalant, Antifoulant & Corrosion Inhibito

PRODUCT DESCRIPTION : AquaTreat-1524 is an all-organic deposit control agent and corrosion inhibitor specially designed for the control of scaling, fouling and corrosion in recirculatory cooling water systems. It also contains a specific yellow metal inhibitor that has excellent halogen stability. AquaTreat-1524 contains no toxic chemicals and can be discharged directly into effluent without any pollution problems.

GENERAL SPECIFICATIONS : Appearance: Clear colorless to paleyellow liquidWt/ml: 1.05 to 1.15 @ 30 'CpH (as is) : Acidic

ADVANTAGES :

  1. Prevention of scales, non-biological fouling and corrosion of yellow metal.
  2. Excellent control of carbonates, sulphates and silicate scales and iron fouling.
  3. It is effective over a wide pH range.
  4. Holds blow down to a minimum by retaining higher levels of hardness in circulating water.
  5. Has excellent thermal and hydrolytic stability.
  6. Is non-toxic and non-polluting, therefore can be discharged directly into the effluent without any problem.
  7. Keeps a heat transfer surface clean and optimizes heat transfer efficiency.
  8. Easy to handle, being a liquid product.

DOSAGE : Proper dosage depends on various factors and conditions encountered in specific systems. For best results, continuous feeding of AquaTreat-1524 is recommended. Normally it is used in conjunction with other corrosion inhibitors for most aqueous systems. Initial passivation requires a higher dose. Once the system is passivated normal concentration level can be maintained.

FEEDING : AquaTreat-1524 can be fed directly from the container or as an aqueous diluted solution to a cooling water line, cooling tower basin or at any other point, where thorough mixing is ensured.

HANDLING :

  • Contact with the eye or prolonged contact with skin should be avoided.
  • AquaTreat-1524 should not be taken internally.
  • In case of contact with skin, the affected area should be washed with plenty of water.
  • In case of contact with eyes, they should be flushed with water and prompt medical attention obtained.
  • Gloves and goggles should be preferably used when handling concentrated solutions.

PACKING : AquaTreat-1524 is available in 50 liters HDPE carbouys/200 liters HDPE drums.

STORAGE : AquaTreat-1524 should be stored under shade and should not be exposed to direct sunlight.


 

Aquatreat-1530 Antiscalant And Dispersant (High Temp. App)

DESCRIPTION AND USE : AquaTreat-1530 is an all-organic blend of antiscalants and polymeric dispersants that provides excellent control over mineral scalants and foulants in industrial evaporative cooling water systems, particularly in systems where high temperatures are encountered. It incorporates a synergistic combination of dispersants, threshold inhibitors and crystal distorters to achieve complete control over scaling and fouling. Besides preventing scale formation and deposition, it also helps in removing existing scales, when used under specified conditions. It not only disperses but also dissolves iron oxide, a product of corrosion and helps keep the surfaces clean. It permits higher levels of hardness salts in water enabling operation at high cycles with hard make up water. It is effective over a wide range of pH and water treated with AquaTreat-1530 can be safely discharged without any treatment in the effluent.

GENERAL SPECIFICATIONS : Appearance: Clear pale yellow liquidWt/ml: 1.21 to 1.23pH (as is) : 9.9 -10.1Solubility: Soluble in water

APPLICATION AND DOSAGE : AquaTreat-1530 exhibits antiscaling properties by threshold inhibition, sequestration, crystal distortion and dispersion. It is the product of choice in application areas like thermal desalinators/ multi stage flash evaporators and the like. The effective dose levels depend upon factors like water characteristics, fouling potential, used and other system specifics. It can tolerate hardness at high levels in the system (even up to 2000 ppm as CaCO3).  AquaTreat-1530 must be fed continuously to ensure that recommended levels of residuals are maintained at all times. The product should be fed neat from the container through equipment using non-corrosive components like PP, PE, PVC or Teflon. Our field experts will help you in designing suitable dosing arrangement for your system.

HANDLING AND STORAGE :

  • Avoid contact with eyes and prolonged contact with skin.
  • Do not take internally.
  • In case of contact with eyes, flush with ample water and get prompt medical attention.
  • Gloves and goggles should be used where appropriate.
  • AquaTreat-1530 containers should be stored airtight under shade and away from direct sunlight.

PACKING : AquaTreat-1530 is available in 50 liters HDPE carbouys/200 liters HDPE drums.


 

Aquatreat-1545 H Antiscalant And Antifoulant

DESCRIPTION AND USE : AquaTreat-1545 is an all-organic blend of antiscalants and polymeric dispersants to provide excellent control over mineral foulants in industrial evaporative cooling water systems. It incorporates a synergistic combination of dispersants, threshold inhibitors and crystal distorters to achieve complete control over deposit and fouling. Besides preventing scale formation and deposition, it also helps in removing existing scales, when used under specified conditions. It exhibits excellent control over iron fouling. AquaTreat-1545 is an excellent orthophosphate inhibitor and reconditions it so that it affords synergistic corrosion control. It permits high levels of hardness salts in water enabling to operate the system at high cycles of concentration. It is effective over a wide range of pH.Water treated with AquaTreat-1545 can be safely discharged without any treatment in the effluent.

GENERAL SPECIFICATIONS : Appearance: Clear colorless to yellow liquidWt./ml: 1.1 – 1.2pH (as is) : 3 – 4Solubility: Soluble in water

APPLICATION AND DOSAGE : AquaTreat-1545 provides inhibition and dispersion of all mineral scales, dirt, dust, and silt,etc. and keeps the heat transfer surfaces clean for optimum heat transfer efficiency. The effective dose levels depend upon factors like hardness, pH, temperature, other water characteristics, fouling potential, other inhibitors used and system specifics. It is recommended for use up to 600-ppm total hardness in the system for best results. It is non-toxic and non-polluting at use levels. AquaTreat-1545 must be fed continuously to ensure that recommended levels of residuals are maintained at all times. The product should be fed neat from the container through equipment using non-corrosive components like PP, PE, PVC or Teflon. Our field experts will help you in designing suitable dosing arrangement for your system.

HANDLING AND STORAGE :

  • Avoid contact with eyes and prolonged contact with skin.
  • Do not take internally.
  • In case of contact with eyes, flush with ample water and get prompt medical attention.
  • Gloves and goggles should be used where appropriate AquaTreat-1545 containers should be stored airtight under shade and away from direct sunlight.

PACKING : AquaTreat-1545 is available in 50 liters HDPE carbouys/200 liters HDPE drums.


 

Aquatreat-1545 Antiscalant And Antifoulant

DESCRIPTION AND USE : AquaTreat-1545 is an all-organic blend of antiscalants and polymeric dispersants to provide excellent control over mineral foulants in industrial evaporative cooling water systems. It incorporates a synergistic combination of dispersants, threshold inhibitors and crystal distorters to achieve complete control over deposit and fouling. Besides preventing scale formation and deposition, it also helps in removing existing scales, when used under specified conditions.It exhibits excellent control over iron fouling. AquaTreat-1545 is an excellent orthophosphate inhibitor and reconditions it so that it affords synergistic corrosion control. It permits high levels of hardness salts in water enabling to operate the system at high cycles of concentration. It is effective over a wide range of pH.Water treated with AquaTreat-1545 can be safely discharged without any treatment in the effluent.

GENERAL SPECIFICATIONS : Appearance: Clear colorless to yellowliquidWt/ml: 1.05 - 1.15 @ 30 'CpH (As Is): 3 – 4Solubility: Soluble in water

APPLICATION AND DOSAGE : AquaTreat-1545 provides inhibition and dispersion of all mineral scales, dirt, dust, and silt,etc.and keeps the heat transfer surfaces clean for optimum heat transfer efficiency. The effective dose levels depend upon factors like hardness, pH, temperature, other water characteristics, fouling potential, other inhibitors used and system specifics. It is recommended for use up to 600-ppm total hardness in the system for best results. It is non-toxic and non-polluting at use levels.AquaTreat-1545 must be fed continuously to ensure that recommended levels of residuals are maintained at all times. The product should be fed neat from the container through equipment using non-corrosive components like PP, PE, PVC or Teflon. Our field experts will help you in designing suitable dosing arrangement for your system.

HANDLING AND STORAGE :

  • Avoid contact with eyes and prolonged contact with skin.
  • Do not take internally.
  • In case of contact with eyes, flush with ample water and get prompt medical attention.
  • Gloves and goggles should be used where appropriate AquaTreat-1545 containers should be stored airtight under shade and away from direct sunlight.

PACKING : AquaTreat-1545 is available in 50 liters HDPE carbouys/200 liters HDPE drums.


 

Aquatreat-1555 Antiscalant & Antifoulant

PRODUCT DESCRIPTION AND USE : AquaTreat-1555 is an all-organic blend of antiscalants and polymeric dispersants to provide excellent control over mineral foulants in industrial evaporative cooling water systems. Besides preventing scale formation and deposition, it also helps remove existing scales, when used under specified conditions. It exhibits excellent control over iron fouling. When used along with corrosion inhibitors like AquaTreat-2501 it affords excellent synergy for total control over corrosion, scaling and non-biological fouling Water treated with AquaTreat-1555 is safe to discharge in effluent without any pollution problems.

GENERAL SPECIFICATIONS : Appearance: Clear colorless to paleyellow liquidWt/ml: 1.05 – 1.15 @ 30 'CpH (as is): AcidicSolubility: Soluble in water

APPLICATION AND DOSAGE : AquaTreat-1555 exhibits antiscaling properties by threshold inhibition, crystal distortion and sequestration. The effective dose level depends on various factors like hardness, pH, temperature, fouling potential, other inhibitors used and system specifics. It is recommended for use up to 800 ppm total hardness (as CaCO3 ) in the system for best results. It is non-toxic and non-polluting at use levels.AquaTreat-1555 must be fed continuously to ensure that recommended levels of residuals are maintained at all times. The product can be fed neat from the container or with dosing equipment using non-corrosive components like PP, PE, PVC or Teflon.

HANDLING AND STORAGE :

  • Avoid contact with eyes and prolonged contact with skin.
  • Do not take internally.
  • In case of contact with eyes, flush with ample water and get prompt medical attention.
  • Gloves and goggles should be used where appropriate.
  • AquaTreat-1555 containers should be stored airtight under shade and away from direct sunlight.

PACKING : AquaTreat-1555 is available in 50 liters HDPE carbouys/200 liters HDPE drum.


 

Aquatreat-2000 Engine Coolant Corrosion And Scale Inhibitor

DESCRIPTION AND USE : AquaTreat-2000 is a blend of corrosion inhibitors, antiscalants and polymeric dispersants to provide excellent control over corrosion attack and mineral foulants in engine cooling water systems. Besides preventing scale formation and deposition, it also helps remove existing scales, when used under specified conditions. It provides excellent control over iron fouling. It prevents scale deposition and reconditions it to afford synergistic corrosion control. It contains specific yellow metal corrosion inhibitor that has excellent stability.

PRODUCT HIGHLITES

  • PROTECTS FROM CORROSION
  • PROTECTS FROM PITTING
  • KEEPS HEAT EXCHANGE SURFACE CLEAN.
  • SAFE TO HANDLE AND COMPATIBLE WITH NON-METALIC PARTS.

GENERAL SPECIFICATIONS : Appearance Dark Purple liquidWt./ml: 1.0 to 1.1pH (1% soln. in distilled water) : Alkaline >11-12Solubility: Soluble in water

APPLICATION AND DOSAGE : INITIAL TREATMENT-NEW ENGINESTo assure a clean system free from both corrosion and scale deposits, add 500 ml of AquaTreat-2000 to the radiator for every 15 liters of engine coolant.FOR RUNNING ENGINESIn case system is fouled drain entire system, clean and dose 1 liter for every 30 liters of water.REGULAR TREATMENT DOSAGEAdd 500 ml every week .In case there is water loss dose 500 ml for evry 15 liters of make up water.
It is non-toxic and non-polluting at use levels.

HANDLING AND STORAGE : AquaTreat-2000 is highly alkaline therefore take all the precautions as required for Caustic handling.Avoid contact with eyes and prolonged contact with skin. Do not take internally. In case of contact with eyes, flush with ample water and get prompt medical attention. Gloves and goggles should be used.


 

Aquatreat-2150 Yellow Metal Corrosion Inhibitor

PRODUCT DESCRIPTION : AquaTreat-2150 is a blend of yellow metal corrosion inhibitors for use as a supplementary product where copper or copper based metallurgy is to be protected or where the treatment programme does not contain a yellow metal inhibitor. Aquatreat-2150 contains no toxic chemicals and can be discharged directly into effluent without any pollution problems.

GENERAL SPECIFICATIONS : Appearance: Clear pale yellow to light pinkliquidWt/ml. : 1.0 to 1.05pH (As Is) : Acidic

ADVANTAGES :

  1. It is a strong yellow metal corrosion inhibitor.
  2. It is effective over a wide range of pH.
  3. It has excellent thermal and hydrolytic stability.
  4. It is non-toxic and non-polluting, therefore can be discharged directly into the effluent without any problem.
  5. It is a specific halogen resistant blend of inhibitors.

DOSAGE : Proper use level depends on various factors and conditions encountered in specific systems. For best results, continuous feeding of Aquatreat-2150 is recommended. Normally it is used in conjunction with other corrosion inhibitors for most aqueous systems. Initial passivation requires a higher dose. Once the system is passivated normal concentration level can be maintained.

FEEDING : Aquatreat-2150 can fed directly from the container or as an aqueous diluted solution to a cooling water line, cooling tower basin or at any other point, where thorough mixing is ensured.

HANDLING PRECAUTIONS :

  • Contact with the eye or prolonged contact with skin should be avoided.
  • Aquatreat-2150 should not be taken internally.
  • In case of contact with skin, the affected area should be washed with plenty of water.
  • In case of contact with eyes, they should be flushed with water and prompt medical attention obtained.
  • Gloves and goggles should be preferably used when handling concentrated solutions.

PACKING : Aquatreat-2150 is available in 50 liters HDPE carbouys/200 liters HDPE drums.

STORAGE : Aquatreat-2150 should be stored under shade and should not be exposed to direct sunlight.


Aquatreat-2500 Non-Zinc Corrosion Inhibitor

PRODUCT DESCRIPTION : AquaTreat-2500 is a highly effective and concentrated blend of inorganic phosphates designed for the control of corrosion in Cooling Water Systems.

SPECIFICATIONS : Appearance: Clear liquidWt/ml. : 1.35 min.Solubility: Soluble in waterpH (1% soln. in distilled water): Acidic <3

DOSAGE : Generally AquaTreat-2500 is found to be effective at a dose level of 15-25 mg/lit.

FEEDING : AquaTreat-2500 can be fed directly from the container to the Cooling Tower basin where thorough and instant mixing can be ensured.

HANDLING & SAFETY :

  • AquaTreat-2500 should be handled like any other industrial chemical such as acid, alkali etc.
  • The product should be stored in a cool and dry place away from direct sunlight, sources of moisture, heat etc.
  • Protective gears like goggles, gloves, and safety shoes must be worn while handling the product. Avoid direct contact with skin.
  • In case of accidental splash, wash the affected part with plenty of fresh water and get immediate medical attention.

ENVIRONMENTAL SAFETY:AquaTreat-2500 is non-toxic and non-polluting at the recommended use level. The constituents of AquaTreat-2500 are completely biodegradable and can be safely discharged into any waste stream.AquaTreat-2500 is not recommended for use in potable water systems.

PACKING:AquaTreat-2500 is available in 50 liters HDPE carbouys/200 liters HDPE drums.


 

Aquatreat-2501 Corrosion Inhibitor

DESCRIPTION AND USE : AquaTreat-2501 is a highly effective and concentrated blend of inorganic corrosion inhibitors for the control of corrosion in evaporative cooling water systems using soft to moderately high hardness water and with high corrosion potential. Water treated with it is safe for discharge, directly into the effluent. It provides steel metallurgy with both cathodic and anodic corrosion protection. When used with stabilizing deposit control agents like Aqua Treat 1189 Aqua Treat 1190, AquaTreat 1191, AquaTreat 1192, AquaTreat-1545, AquaTreat-1522 etc., it provides total control over corrosion, scaling and non-biological fouling. The product is effective over a wide range of pH and provides high flexibility in controlling the corrosion of steel metallurgy.The product does not pose any limitation in systems with high holding time. It is compatible with most other cooling water treatment chemicals generally used.

GENERAL SPECIFICATIONS : Appearance: Clear to slightly hazy liquidWt/ml: 1.5 5 minpH (1% soln. in distilled water ): Acidic

APPLICATION AND DOSAGE : AquaTreat-2501 provides cathodic and anodic corrosion inhibition by forming complex protective films on the metal surface formed by the metal, chemical components and hardness salts present in water. The product is effective over a wide range of pH. Being a concentrated blend, the required dosage is quite low. The right use level however depends on factors like corrosion potential, temperature, water and flow characteristics and other system specifics.AquaTreat-2501 must be fed continuously to ensure that the recommended level of residual is maintained at all times. The product should be fed neat from the container through equipment using non-corrosive components like PP, PE, PVC or Teflon.

HANDLING AND STORAGE :

  • Avoid contact with eyes and prolonged with skin.
  • Do not take internally. In case of contact with eyes, flush with ample water and get prompt medical attention.
  • Gloves and goggles should be used where appropriate.
  • AquaTreat-2501 containers should be stored under shade and should be airtight and away from direct sunlight.

PACKING : AquaTreat-2501 is available in 50 liters HDPE carbouys/200 liters HDPE drums.


Aquatreat-2572 Corrosion Inhibitor

DESCRIPTION AND USE : AquaTreat-2572 is a specially designed inorganic corrosion inhibitor based on molybdates to afford corrosion control in industrial cooling water systems. It provides excellent corrosion control in synergy with other inhibitors like phosphates, phosphonates, nitrites, metals etc. It is recommended where the application of Zinc based corrosion inhibitors are undesirable. It is an excellent corrosion inhibitor, equivalent to chromate, safe to handle and discharge without causing pollution related problems. When used along with other corrosion inhibitors, antiscalants, antifoulants and dispersants it provides excellent synergistic effect for overall control of sccorrosion. It gives excellent corrosion protection where bulk water temperature is hiand where other conventional inhibitors find limitations. It is effective over a wide pH range and with water having high corrosion potential like DM or soft water.

GENERAL SPECIFICATIONS : Appearance: Clear yellow liquidWt/ml: 1.15 to 1.2pH (As Is): 10-11Solubility: Soluble in water

APPLICATION AND DOSAGE : AquaTreat-2572 provides excellent corrosion protection by forming a complex with the metal surface. It is effective over a wide range of pH. The optimum feed rate depends on factors like corrosion potential of water, temperature, system specifics and other corrosion cum scale inhibitors used. It is non-toxic and non-polluting at use levels.AquaTreat-2572 must be fed continuously to ensure that recommended level of residual is maintained at all times. The product should be fed neat from the container through equipment using suitable metallurgy to handle alkaline material.

HANDLING AND STORAGE :

  • Avoid contact with eyes and prolonged contact with skin.
  • Do not take internally.
  • In case of contact with eyes, flush with ample water and get prompt medical attention.
  • Gloves and goggles should be used where appropriate.
  • AquaTreat-2572 Containers should be stored airtight under shade and away from direct sunlight.

PACKING : AquaTreat-2572 is available in 50 liters HDPE carbouys/200 liters HDPE drums.


Aquatreat-2630 Co Rrosion And Scale Inhibitor

PRODUCT DESCRIPTION:AquaTreat-2630 is a liquid corrosion and scale inhibitor designed for open re-circulatory cooling water system using moderately hard to hard water as make up. It provides both cathodic and anodic corrosion inhibition. Water treated with AquaTreat-2630 can be discharged into the effluent without any pollution problems.When used along with stabilizing antifoulants like AquaTreat-6620, AquaTreat-6770 etc. it affords complete protection over corrosion, scaling and non-biological fouling in cooling water systems. It is effective over a wide alkaline pH range and is also suitable for systems with high holding time.

GENERAL SPECIFICATIONS:Appearance: Clear colorless to pale yellowliquidWt/ml. : 1.15 to 1.25 @ 30 'CpH (As Is): Acidic

APPLICATION AND DOSAGE:AquaTreat-2630 provides cathodic and anodic corrosion inhibition by forming complex protective films on the metal surface Normally water with moderate alkalinity does not require much pH control. However, for optimum benefit it is recommended that the pH is maintained below 8.5. The proper dose level depends on factors like corrosion and fouling potential, temperatures, water characteristics and other system specifics. AquaTreat-2630 must be fed continuously to ensure that the recommended levels of residuals are maintained at all times. The product should be fed neat from the container through equipment using non-corrosive components like PP, PE, PVC or Teflon.

HANDLING AND STORAGE:

  • Avoid contact with eyes and prolonged contact with skin.
  • Do not take internally.
  • In case of contact with eyes, flush with ample water and get prompt medical attention.
  • Gloves and goggles should be used where appropriate.
  • AquaTreat-2630 containers should be stored airtight under shade and away from direct sunlight.

PACKING:AquaTreat-2630 is available in 50 liters HDPE carbouys/200 liters HDPE drum.


Aquatreat-2640 Corrosion And Scale Inhibitor

PRODUCT DESCRIPTION : AquaTreat-2640 is a liquid corrosion and scale inhibitor designed for open re-circulatory cooling water system using soft to moderately hard water as make up. It provides both cathodic and anodic corrosion inhibition. Water treated with AquaTreat-2640 can be discharged into the effluent without any pollution problems. When used along with stabilizing antifoulants like AquaTreat-6620, AquaTreat-6770 etc. it affords complete protection over corrosion, scaling and non-biological fouling in cooling water systems. It is effective over a wide alkaline pH range and is also suitable for systems with high holding time.

GENERAL SPECIFICATIONS :
Appearance: Clear colorless to pale yellow liquidWt/ml. : 1.35 to 1.40 @ 30 0 CPH (as is): Acidic

APPLICATION AND DOSAGE : AquaTreat-2640 provides cathodic and anodic corrosion inhibition by forming complex protective films on the metal surface. Normally water with moderate alkalinity does not require much pH control. However, for optimum benefit it is recommended that the pH is maintained below 8.5. The proper dose level depends on factors like corrosion and fouling potential, temperatures, water characteristics and other system specifics.AquaTreat-2640 must be fed continuously to ensure that the recommended levels of residuals are maintained at all times. The product should be fed neat from the container through equipment using non-corrosive components like PP, PE, PVC or Teflon.

HANDLING AND STORAGE :

  • Avoid contact with eyes and prolonged contact with skin.
  • Do not take internally.
  • In case of contact with eyes, flush with ample water and get prompt medical attention.
  • Gloves and goggles should be used where appropriate.
  • AquaTreat-2640 containers should be stored airtight under shade and away from direct sunlight.

PACKING : AquaTreat-2640 is available in 50 liters HDPE carbouys/200 liters HDPE drums.


Aquatreat 2651 Corrosion Cum Deposit Control Agent

AquaTreat 2651CORROSION CUM DEPOSIT CONTROL AGENT (FOR CLOSED LOOP SYSTEMS)

DESCRIPTION AND USE : AquaTreat-2651 is a liquid corrosion and scale inhibitor for sealed cooling systems and chilled water circuits using distilled, softened (total hardness).

GENERAL SPECIFICATION : Appearance: Slightly hazy pale yellow liquidWt/ml: 1.25 – 1.35 @ 30 0 CpH (As Is) : Alkaline >10

TREATMENT AND DOSAGE : AquaTreat-2651 is normally dosed to maintain the level of treatment, in the system, above a minimum value specified For less than 50 mg/l chlorides in the water, for example, the initial dose is normally 5 liters/M3 (5 gals/1000 gals) and is controlled subsequently to maintain a minimum of 800 mg/l nitrite (NO2) in the system.A very simple control test, based on reagents in tablet form, is available. AQUATREAT-2651 should be injected by means of a dosage pot, or dosage pump.

HANDLING AND STORAGE : Avoid contact with skin and eyes

  • Keep away from acids
  • Avoid extremes of temperature.
  • Replace caps securely after use.
  • Recommended maximum storage limit is 2 years.
  • Wear suitable gloves (rubber) and eye/face protection
  • Fire hazard if allowed to dry in contact with combustibles.
  • DO NOT ALLOW THIS PRODUCT TO CONTAMINATE SURFACE WATER COURSES.

FIRST AID : In case of contact with skin wash affected area immediately with water. Remove any contaminated clothing. In severe cases seek medical attention. In case of contact with eyes irrigate thoroughly with clean water for at least 10 minutes. Seek immediate medical attention. If ingested, wash mouth out with water and drink plenty of water. Do NOT induce vomiting. Seek immediate medical attention.

PACKING:Available in 50 litres HDPE carbouys/200 liters HDPE drums.


Aquatreat - 2715 H Corrosion And Scale Inhibitor

AquaTreat - 2715 HCORROSION AND SCALE INHIBITOR(FOR CLOSED LOOP SYSTEMS)

PRODUCT DESCRIPTION : AquaTreat - 2715 H is a nitrite-borate, scale cum corrosion inhibitor designed for use in closed re-circulation systems. It affords corrosion protection for multimetal systems. AquaTreat - 2715 H is non-toxic at the recommended use levels. Thus, water treated with AquaTreat - 2715 H can be discharged directly into the effluent stream. AquaTreat - 2715 H is compatible with ethylene glycol.

GENERAL SPECIFICATIONS : Appearance: Clear yellow liquidpH (as is) : 10 - 11Wt./ml: 1.2 – 1.35Solubility: Soluble in water

APPLICATION AND DOSAGE : AquaTreat - 2715 H is used in closed loop-cooling system where the water losses are small and the system does not require regular fresh water make-up. It performs best in systems where air and oxygen ingress is minimal.The product performs effectively over a wide pH range and pH correction is therefore not necessary. However, pH should not be allowed to fall below 6.0. The product also passivates the system already corroded. AquaTreat - 2715 H being liquid is easy to handle. Proper dosage depends upon water characteristics and other system specifics. The dosing will be based on total volume of water in the system. Higher dosage is required for corrosive water like D.M. water or desalinated water. Generally a dose rate of 1500 to 2500 is found to be adequate. It is always preferable to apply the product on clean surfaces for best results.

NOTE : No chlorination or oxidizing biocides should be used with AquaTreat - 2715 H. Adequate reserve of nitrite should always be maintained in the system. AquaTreat - 2715 H can be fed directly from the container to a point where proper mixing can be ensured.

HANDLING AND STORAGE : Avoid contact with eyes and prolonged contact with skin. Do not take internally. In case of contact with eyes, flush with ample water and get prompt medical attention. Gloves and goggles should be used where appropriate.AquaTreat - 2715 H containers should be stored airtight under shade and away from direct sunlight.

PACKING : AquaTreat - 2715 H is available in 50 litres HDPE carbouys/200 litres HDPE drum.


Aquatreat-2725 G Corrosion And Scale Inhibitor

AquaTreat-2725 GCORROSION AND SCALE INHIBITOR(FOR CLOSED LOOP SYSTEMS)

PRODUCTION DESCRIPTION : AquaTreat - 2725 G is a nitrite-borate, scale cum corrosion inhibitor designed for use in closed re-circulation systems. It affords corrosion protection for multimetal systems. AquaTreat - 2725 G is non-toxic at the recommended use levels. Thus, water treated with AquaTreat - 2725 G can be discharged directly into the effluent stream. AquaTreat - 2725 G is compatible with ethylene glycol.

GENERAL SPECIFICATIONS : Appearance: Clear yellow liquidpH (As Is) : 10 - 11Wt/ml: 1.25Solubility: Soluble in water

APPLICATION AND DOSAGE : AquaTreat - 2725 G is used in closed loop-cooling system where the water losses are small and the system does not require regular fresh water make-up. It performs best in systems where air and oxygen ingress is minimal.The product performs effectively over a wide pH range and pH correction is therefore not necessary. However, pH should not be allowed to fall below 6.0. The product also passivates the system already corroded. AquaTreat - 2725 G being liquid is easy to handle. Proper dosage depends upon water characteristics and other system specifics. The dosing will be based on total volume of water in the system. Higher dosage is required for corrosive water like D.M. water or desalinated water. Generally a dose rate of 1500 to 2500 is found to be adequate. It is always preferable to apply the product on clean surfaces for best results.

NOTE : No chlorination or oxidizing biocides should be used with AquaTreat-2725 G. Adequate reserve of nitrite should always be maintained in the system. AquaTreat - 2725 G can be fed directly from the container to a point where proper mixing can be ensured.

HANDLING AND STORAGE : Avoid contact with eyes and prolonged contact with skin. Do not take internally. In case of contact with eyes, flush with ample water and get prompt medical attention. Gloves and goggles should be used where appropriate.AquaTreat - 2725 G containers should be stored airtight under shade and away from direct sunlight.

PACKING : AquaTreat - 2725 G is available in 50 litres HDPE carbouys/200 litres HDPE drum.


Aquatreat - 2725 H Corrosion And Scale Inhibitor

AquaTreat - 2725 HCORROSION AND SCALE INHIBITOR(FOR CLOSED LOOP SYSTEMS)

PRODUCT DESCRIPTION : AquaTreat - 2725 H is a nitrite-borate, scale cum corrosion inhibitor designed for use in closed re-circulation systems. Itaffords corrosion protection for multimetal systems. AquaTreat - 2725 H is non-toxic at the recommended use levels. Thus, water treated with AquaTreat - 2725 H can be discharged directly into the effluent stream. AquaTreat - 2725 H is compatible with ethylene glycol.

GENERAL SPECIFICATIONS : Appearance: Clear colorless to pale yellow liquidpH (as is) : 8 - 11Wt/Ml: 1.1 – 1.2Solubility: Soluble in water

APPLICATION AND DOSAGE : AquaTreat - 2725 H is used in closed loop-cooling system where the water losses are small and the system does not require regular fresh water make-up. It performs best in systems where air and oxygen ingress is minimal. The product performs effectively over awide pH range and pH correction is therefore not necessary. However, pH should not be allowed to fall below 6.0. The product also passivates the system already corroded. AquaTreat - 2725 Hbeing liquid is easy to handle. Proper dosage depends upon water characteristics and other system specifics. The dosing will be based on total volume of water in the system. Higher dosage is required for corrosive water like D.M. wateror desalinated water. Generally a dose rate of 1500 to 2500 is found to be adequate. It is always preferable to applythe product on clean surfaces for best results.

NOTE : No chlorination or oxidizing biocides should be used with AquaTreat - 2725 H. Adequate reserve of nitrite should alwaysbe maintained in the system. AquaTreat - 2725 H can be fed directly from the container to a point where proper mixingcan be ensured.

HANDLING AND STORAGE :

  • Avoid contact with eyes and prolonged contact with skin.
  • Do not take internally.
  • In case of contact with eyes, flush with ample water and get prompt medical attention.
  • Gloves and goggles should be used where appropriate.
  • AquaTreat - 2725 H containers should be stored airtight under shade and away from direct sunlight.

PACKING : AquaTreat - 2725 H is available in 50 litres HDPE carbouys/200 litres HDPE drum.


Aquatreat-2725 Corrosion And Scale Inhibitor

AquaTreat-2725CORROSION AND SCALE INHIBITOR (FOR CLOSED LOOP SYSTEMS)

PRODUCTION DESCRIPTION : AquaTreat-2725 is a nitrite-borate, scale cum corrosion inhibitor designed for use in closed re-circulation systems. It affords corrosion protection for multimetal systems. AquaTreat-2725 is non-toxic at the recommended use levels. Thus, water treated with AquaTreat-2725 can be discharged directly into the effluent stream. AquaTreat-2725 is compatible with ethylene glycol.

GENERAL SPECIFICATIONS : Appearance: Clear pale yellow to yellow liquidpH (As Is): 11-12Wt/ml: 1.2-1.3 @ 30 'CSolubility: Soluble in water

APPLICATION AND DOSAGE : AquaTreat-2725 is used in closed loop-cooling system where the water losses are small and the system does not require regular fresh water make-up. It performs best in systems where air and oxygen ingress is minimal. The product performs effectively over a wide pH range and pH correction is therefore not necessary. However, pH should not be allowed to fall below 6.0. The product also passivates the system already corroded. AquaTreat-2725 being liquid is easy to handle. Proper dosage depends upon water characteristics and other system specifics. The dosing will be based on total volume of water in the system. Higher dosage is required for corrosive water like D.M. water or desalinated water.Generally a dose rate of 1500 to 2500 is found to be adequate. It is always preferable to apply the product on clean surfaces for best results.

NOTE : No chlorination or oxidizing biocides should be used with AquaTreat-2725. Adequate reserve of nitrite should always be maintained in the system. AquaTreat-2725 can be fed directly from the container to a point where proper mixing can be ensured.

HANDLING AND STORAGE:

  • Avoid contact with eyes and prolonged contact with skin.
  • Do not take internally.
  • In case of contact with eyes, flush with ample water and get prompt medical attention.
  • Gloves and goggles should be used where appropriate.
  • AquaTreat-2725 containers should be stored airtight under shade and away from direct sunlight.

PACKING : AquaTreat-2725 is available in 50 liters HDPE carbouys/200 liters HDPE drum.


Aquatreat 2726 Corrosion Cum Scale Inhibitor

AquaTreat 2726CORROSION CUM SCALE INHIBITORFOR CLOSED LOOP SYSTEMS

DESCRIPTION AND USE : AquaTreat-2726 is a specific and highly effective blend of corrosion and deposit inhibitor for closed loop Recirculatory systems. AquaTreat-2726 is based on molybdate - nitrite combination and is most suitable for systems with minimal water losses.AquaTreat-2726 provides corrosion inhibition by metal passivation and effective and sturdy film formation. It also provides excellent multimetal corrosion protection. The latest threshold inhibitors in the product prevent scale formation and the dispersant present in the product permits operation at higher turbidity levels. AquaTreat-2726 is not considered toxic at the recommended use levels. Thus water treated with it, can be safely discharged without any treatment. AquaTreat-2726 displays excellent compatibility with ethylene glycols.

GENERAL SPECIFICATIONS : Appearance: Clear pale yellow to yellow liquidWt./ml: 1.15 to 1.25 @ 30 0 CpH (as is) : 8 to 12Solubility: Soluble in water

APPLICATION AND DOSAGE : AquaTreat-2726 exhibits excellent corrosion inhibition properties for all kinds of metals normally used in chilled water,refrigeration or other primary circuits of the closed loop kind. The product functions in a wide pH range. However, the pH should not fall below 7.0 for best results. The product has excellent thermal and hydrolytic stability even over the wide alkaline pH range. Optimum dosage depends upon water characteristics and other system specifics. The dosing will be based on total volume of water in the system. Normally 1200 to 2000 ppm of product is adequate. No chlorination or oxidizing biocides should be used in systems treated with AquaTreat-2726. AquaTreat-2726 can be fed directly from the container to the water tank where proper mixing can be ensured.

HANDLING AND STORAGE :

  • Avoid contact with eyes and prolonged contact with skin.
  • Do not take internally.
  • In case of contact with eyes, flush with ample water and get prompt medical attention.
  • Gloves and goggles should be used where appropriate.
  • AquaTreat-2726 containers should be stored under shade and should be airtight and away from direct sunlight.

PACKING : AquaTreat-2726 is available in 50 liters HDPE carbouys/200 liters HDPE drums.


Aquatreat-2720 Corrosion And Scale Control Agent

PRODUCT DESCRIPTION : AquaTreat-2720 is used to control scale and corrosion in closed loop-cooling systems.AquaTreat-2720 is not considered toxic at the recommended treatment levels. AquaTreat-2720 displays excellent compatibility with ethylene glycol.

ADVANTAGES :

  1. Affords multi metal protection.
  2. It is effective over a wide pH range. However, the pH should not fall below 6.0.
  3. A single treatment blend for the control of corrosion, scaling and non-biological fouling.
  4. Creates no effluent problems, as chemicals used are non-toxic.
  5. It has excellent thermal and hydrolytic stability.
  6. Passivates systems that are already corroded.
  7. Easy to handle, being a liquid product. 

DOSAGE : Proper dosage depends upon various factors and conditions encountered in specific systems.Feed rate varies from 1800 to 2500 ppm depending on the quality of water used.Wex technical representative will assist in identifying the right use level for your system. 

HANDLING : Contact with eyes or prolonged contact with the skin should be avoided.

  • It should not be taken internally.
  • Should contact with skin occur, wash with plenty of water.
  • In case of contact with eyes, flush with water and get prompt medical attention.
  • Gloves and goggles should be used where appropriate.

Aquatreat-2810 Corrosion Cum Scale Inhibitor ( Non- Mettalic)

DESCRIPTION AND USE :
AquaTreat-2810 is a comprehensive corrosion inhibitor for industrial cooling water systems. The product does not contain any metallic inhibitor and is effective over a wide range of pH. The product is suitable in system where mettallic inhibitorsare not desired.The product also contains new generation threshold inhibitors and crystal distorters that provide excellent control over scaling in systems operating with very hard water.When used with dispersants like AquaTreat-6770 it gives complete protection from corrosion, scaling multimetal systems.

APPLICATION AND DOSAGE :
The product is to be applied in systems where metallic inhibitors are not desired. For complete protection it needs to be used along with dispersants like AquaTreat-6770. The use level depends on the water characteristics, temperature and other system dynamics. WEX TECH. representative will help you in selecting the optimum feed rate for your system. AquaTreat-2810 is to be dosed neat from the container with suitable equipment. Our engineers will assist in designing a suitable dosing arrangement depending on the system needs.

HNDLING AND STORAGE :
Avoid contact with eyes and prolonged contact with skin.
Do not take internally.
In case of contact with eyes, flush with ample water and get prompt medical attention.
Gloves and goggles should be used where appropriate. AquaTreat-2810 containers should be stored airtight under shade and away from direct sunlight.


Aquatreat 3001 Non Oxidizing Biocide

Product Details: Form - Liquid

DESCRIPTION AND USE : AquaTreat 3001 is a broad-spectrum biocide with multi dimensional properties- a strong biocide, biodispersant, & also affords corrosion inhibition. It is effective in badly fouled systems, as it not only destroys bacterial colonies but also flushes out the slime and biofilms. It is effective over a wide range of pH. It is based on a polyamine derivative and is useful in seawater applications to control macro fouling. It exhibits high salt tolerence.

APPLICATION AND DOSAGE : The dose levels depend upon the microbial load in the system. The product generally performs well at a dose level of 10-40 ppm. For precleaning and to clean badly fouled system, higher dose may be required.Our representative will help you in selecting the right use level for your system. AquaTreat 3001 is readily miscible with water and is not affected by pH of the system.The product is applied neat and dosed at a point where good mixing can be ensured. It is recommended to stop water losses and give a minimum contact time of 10-12 hrs for best results. After this contact time, it is advantageous to flush the system to remove dead and dislodged biomass. Water treated with the product is safe for discharge.

HANDLING : AquaTreat 3001 may cause skin and eye irritation. It is harmful if taken internally. In case of contact, flush the affected area with plenty of water. In case of prolonged contact, flush with plenty of water and get prompt medical attention. In case of ingestion, wash out mouth and get medical attention. Contaminated clothing should be thoroughly washed before reuse. Use of protective rubber gloves is recommended during handling of AquaTreat 3001