• +0 80794 52016
  • victorsales@vsnl.net

PRODUCTS RANGE

Expand All | Contact All

Boiler Water Treatment Chemicals

Providing you the best range of Aqua Treat-941 Scale Sludge Conditioner, Aquatreat-1130 Alkalinity Builder, Aquatreat-8382 Non Oxidizing Biocide, Aquatreat-9002 Alkalinity Builder, Aqua Treat-9030 Corrosion Cum Scale Inhibitor and Aqua Treat-9065 Sludge Conditioner with effective & timely delivery.

Aqua Treat-941 Scale Sludge Conditioner

DESCRIPTION AND USE : AquaTreat 941 is a synergistic blend of inorganic phosphate designed for the control of corrosion and scale in High pressure boiler internals. AquaTreat 941 provides co-ordinate phosphate ratio of 2.6-2.8:1., for Boiler operating up to (2000 psig), 110 kg.cm2) The specific corrosion inhibitors in AquaTreat 941 provide corrosion protection by the formation of a protective passive film on the metal surfaces.

GENERAL SPECIFICATIONS : Appearance: Clear yellow liquid.PH: 7.5-9.5Specific Gravity: 1.05 + 0.15

TREATMENT AND DOSAGE : AquaTreat 941 can be dosed directly without dilution. Normally a phosphate reserve is maintained in the boiler water. The proper treatment levels vary with factors like boiler systems, operating conditions, boiler pressure and water characteristics. The product characteristics and viscosity permit easy feeding by on-line dosage pumps. The desired feeding mode is continuous injection to feed water.

PRODUCT BENEFITS:

  • Affords excellent corrosion protection.
  • Prevents deposition of hardness salts.
  • Ensures high mobility of phosphate sludge.
  • Good dispersion of suspended particulate matter
  • Simple control test.
  • Can be dosed directly without dilution.
  • Compatible with total water treatment programme.
  • Ready to use liquid blend.

HANDLING AND STORAGE : Avoid contact with eyes or prolonged contact with skin. DO NOT take internally. In case of contact with skin, wash with plenty of water. In case of contact with eyes, flush with plenty of water and seek immediate medical attention. In case of ingestion, wash mouth thoroughly and drink plenty of water. Do not induce vomiting and seek medical attention.Avoid extremes of temperature and wear gloves and goggles wherever appropriate.

PACKING : Available in 50-liter HDPE containers.


Aquatreat-1130 Alkalinity Builder

DESCRIPTION AND USE : AQUATREAT-1130 is an alkalinity builder used for increasing pH and maintaining the correct alkalinity in boiler water.Alkalinity control is a vital part of any internal boiler water treatment. AQUATREAT-1130 is useful for neutralizing any acid pick up as well as maintenance of correct pH and alkalinity in boiler water. AQUATREAT-1130 is compatible with most chemicals used for total internal boiler water treatment programmes.

GENERAL SPECIFICATIONS : Appearance: Clear colourless liquidpH (as supplied): AlkalineSpecific gravity: 1.47 to 1.50Flammability: Non-flammable

TREATMENT AND DOSAGE : AQUATREAT-1130 can be dosed as such or diluted if desired. It may be dosed directly to the feed tank and the product characteristics permit dosing with any conventional online dosage pumps.The exact dosage will vary with operating conditions and water characteristics. The treatment levels are normally adjusted as per tests for boiler water alkalinity.

PRODUCT BENEFITS :

  • Ready to use liquid product.
  • Reduces acid corrosion
  • Stabilizes protective magnetite film.
  • Simple monitoring procedure.
  • Provides alkalinity control.
  • May be directly used without dilution into boiler.

HANDLING AND STORAGE : Avoid contact with skin and eyes. Keep away from acids. Being a strong alkali, it can cause burns. In case of contact with skin, wash with plenty of water. Remove contaminated clothing and seek immediate medical attention. In case of contact with eyes, flush with plenty of water, cover affected eye with sterile pad and seek immediate medical attention. In case of ingestion wash out mouth thoroughly and drink plenty of water. DO NOT induce vomiting. Seek immediate medical attention. Wear gloves and goggles wherever appropriate.

PACKING : Available in 50 litres HDPE containers.


 

Aquatreat-8382 Non Oxidizing Biocide

DESCRIPTION AND USE : AquaTreat-8382 is a specific blend of biocide based on organic compounds for effective control of algae, fungi and general type of bacteria found in cooling water systems. The active biocide causes stress on cell wall of bacteria causing cell lyses and cell death.

GENERAL SPECIFICATIONS : Appearance: Clear to Hazzy brown liquidWt/ml: 1.10 @ 30 'c pH (As Is): >9Solubility: Soluble in water

APPLICATION AND DOSAGE : The product is to be dosed neat in cooling tower sump at a point where thorough mixing is ensured. While dosing the product, care should be taken to close/minimize water losses through the tower to ensure good contact time of at least 8 -12 hrs. For best effect, it is always beneficial to give blow down after this contact time to remove dead iomass from the system.

Effective dosage varies with the system demand. Badly fouled systems will need higher dosage or precleaning. Generally a dose level of 30 to 75 ppm is sufficient. Howeve. The product is not recommended in potable water system. Other applications include paper mill water system, oil well brines, drilling fluids, paints, latex emulsions and the like.

FEEDING : AquaTreat-8382 can be fed directly from the container into ths basin of the cooling water system or at any other point where good mixing can be assured. No special feeding equipment is required.

HANDLING :
AquaTreat-8382 may cause skin and eye irritation.
It is harmful if taken internally.
In case of contact, flush the affected area with plenty of water.
In case of prolonged contact, flush with plenty of water and get prompt medical attention.In case of ingestion, induce vomiting by administering warm salt water or any other emetic and get medical attention.
Contaminated clothing should be thoroughly washed before reuse.
Use of protective rubber gloves is recommended during handling of AquaTreat-8382.

ENVIRONMENTAL SAFETY :
AquaTreat-8382 is toxic to fish. Do not use in potable water systems or where contamination of potable water may occur. with cooling water system Aqua Treat 8382 is slowly hydrolyzed to non-toxic products.Most of these products are volatyle and are stripped off from the system, thus posing no effluent problems.

PACKING :
Aqua Treat -8382 is packed in 50 liters HDPE carbouys/200 liters HDPE drums.


 

Aquatreat-9002 Alkalinity Builder

DESCRIPTION AND USE : AquaTreat-9002 is an alkalinity builder. It also contains organic dispersants and antifoam. AquaTreat-9002 is used for imparting alkalinity to boiler water or for correcting the pH of low alkalinity waters.

GENERAL SPECIFICATION :
Appearance: Clear liquidpH: AlkalineSpecific gravity: 1.40 to 1.50Freezing point: < –20oCFlash Point: Non-flammable

TREATMENT AND DOSAGE : AquaTreat-9002 is applied to maintain the boiler water alkalinity within limits. To suit the operating conditions. Water characteristics will determine the dosage rate. AquaTreat-9002 may be injected using a dosage pump, dosage pot or directly into the feed tank (whichever is appropriate to the particular plant).

PRODUCT BENEFITS:

  • Reduces acid corrosion.
  • Stabilizes protective films.
  • Simple monitoring procedures.
  • Provides alkalinity control.
  • Reduces foaming.
  • Softens Silica Scales.

POTENTIAL HAZARDS:Causes severe burns (R35)

SPILL PROCEDURES:Flush to drain with large quantities of water, observe disposal regulations. Avoid splashing and skin/eye contact.

PROTECTIVE EQUIPMENT:Wear suitable gloves and eye/face protection.

HANDLING AND STORAGE:

  • Avoid contact with skin and eyes.
  • Keep away from acid. Incase of contact with skin flush area with water for atleast 10 minutes.
  • Remove any contaminated clothing and seek immediate medical attention.
  • Incase of contact with eyes wash thoroughly with clean water for at least 10 minutes.
  • Cover affected eyes with sterile eye-pad and seek immediate medical attention.
  • Incase of ingestion wash mouth thoroughly and drink plenty of water.
  • DO NOT induce vomiting. Seek immediate medical attention
  • Recommended maximum storage limit is 2 years.

PACKING:Available in 35 lit, 50 lit drums.


 

Aqua Treat-9030 Corrosion Cum Scale Inhibitor

DESCRIPTION AND USE : AquaTreat-9030 is a synergistic blend of inorganic and organic chemicals designed for the control of corrosion, sludge conditioner and scale in boiler internals. The specific corrosion inhibitors in AquaTreat-9030 provide corrosion protection by the formation of a protective passive film on the metal surfaces. The protective layer prevents direct contact of the corrosive media (water) with the metal surface.AquaTreat-9030 also contains powerful threshold inhibitor to prevent scale formation in feed water pipelines and boiler internals. The crystal distorter and specified dispersant incorporated in the product ensures high mobility of the phosphate sludge formed so that it is easily removed by blowdown. The dispersant also ensures that suspended particulate matter do not accumulate and are removed by the blowdown. AquaTreat 9030 is compatible with almost all products used in total boiler water treatment programmes.

GENERAL SPECIFICATIONS : Appearance: Clear Colorless To Pale Yellow liquid.PH: 7.0 to 8.0Specific Gravity: 1.10 + 0.05

TREATMENT AND DOSAGE : AquaTreat-9030 can be dosed directly without dilution. Normally a phosphate reserve is maintained in the boiler water. The proper treatment levels vary with factors like boiler systems, operating conditions, boiler pressure and water characteristics. The product characteristics and viscosity permit easy feeding by on-line dosage pumps. The desired feeding mode is continuous injection to feed water.

PRODUCT BENEFITS :

  • Affords excellent corrosion protection.
  • Prevents deposition of hardness salts.
  • Ensures high mobility of phosphate sludge.
  • Good dispersion of suspended particulate matter
  • Simple control test.
  • Can be dosed directly without dilution.
  • Compatible with total water treatment programme.
  • Ready to use liquid blend.

HANDLING AND STORAGE : Avoid contact with eyes or prolonged contact with skin. DO NOT take internally.In case of contact with skin, wash with plenty of water. In case of contact with eyes, flush with plenty of water and seek immediate medical attention. In case of ingestion, wash mouth thoroughly and drink plenty of water. Do not induce vomiting and seek medical attention. Avoid extremes of temperature and wear gloves and goggles wherever appropriate.

PACKING : Available in 50 litre HDPE containers.


 

Aqua Treat-9065 Sludge Conditioner

DESCRIPTION AND USE : AquaTreat-9065 is a specially designed dispersant for the prevention of scaling in boilers and in boiler feed lines. It causes calcium and magnesium hardness salts to form a light, mobile floc, easily removed by blow down. AquaTreat-9065 is normally used with an oxygen scavenger and a phosphate.

GENERAL SPECIFICATION : Appearance: Clear colorless to pale yellow liquidpH as supplied: 7.5 to 9.0Specific gravity: 1.02 to 1.05

TREATMENT AND DOSAGE : AquaTreat-9065 is normally maintained at concentrations between 100 and 500 mg/l, in the boiler water. The correct treatment level for scale prevention depends on operating conditions such as the boiler pressure and the alkalinity of the boiler water. The viscosity of AquaTreat-9065 allows it to be handled by conventional dosing pumps without dilution, but it may be diluted if desired. AquaTreat-9065 is not corrosive to steel mixing tanks or dosage pumps, in concentrated or dilute form.

PRODUCT BENEFITS :

  • Effective scale inhibition for boilers.
  • Low toxicity.
  • Compatible with a complete boiler water treatment programme.
  • May be dosed direct from the drum.

POTENTIAL HAZARDS : This product is not considered to be harmful, but as with all industrial chemicals care should be taken in its use. Wear suitable gloves and eye/face protection (S 37/39)

SPILL PROCEDURES : Flush to drain with plenty of water.

HANDLING AND STORAGE : Avoid contact with skin and eyes. Avoid extremes of temperature. Replace caps securely after use. In case of contact with skin wash well with soap and water. In case of contact with eyes wash immediately with plenty of water for at least 10 minutes. If any irritation persists, seek medical attention. In case of ingestion wash out mouth thoroughly and drink plenty of water. Do NOT induce vomiting. If any discomfort persists, seek medical attention.
Recommended maximum storage limit is 2 ears.

PACKING : Available in 35 lit, 50 lit drums.


 

Aquatreat-9076 Sludge Conditioner

DESCRIPTION AND USE : AquaTreat-9076 is a scale and sludge inhibitor, designed primarily for steam boilers. It is used to prevent the build-up of hardness deposits and/or iron and other metallic oxides, originating from corrosion of condensate systems. AquaTreat-9076 is based on a synergistic blend of dispersant and scale inhibitor.

GENERAL SPECIFICATION : Appearance: Clear colourless to pale yellow liquidpH : 10 – 11Specific gravity: 1.05 to 1.10

TREATMENT AND DOSAGE : AquaTreat-9076 is normally maintained at concentrations between 100 and 500 mg/l in the boiler water. The correct treatment level for deposit prevention depends on operating conditions such as pH and the number of concentrations. The viscosity of AquaTreat-9076 allows it to be handled by conventional dosing pumps, without dilution, but it may be diluted if desired. AquaTreat-9076 is not corrosive to mild steel mixing tanks or dosage pumps in concentrated or in diluted form and may be pumped directly from the container using equipment in steel or plastic.

PRODUCT BENEFITS :
Inhibits scale formation.Keep metals in solution
Disperses deposits.
May be dosed directly from the drum.

POTENTIAL HAZARDS : This product is not considered to be hazardous, but as with all industrial chemicals care should be exercised during its use.

SPILL PROCEDURES :
Spill may be flushed to drain with copious amount of water. Local regulations should be observed and the relevant authorities should be consulted before disposing of large spills.

HANDLING AND STORAGE : Wear suitable gloves and eye/face protection. Avoid contact with skin and eyes. Avoid extremes of temperature. Replace caps securely after use. In case of contact with skin wash well with soap and water. In case of contact with eyes wash immediately with plenty of water for at least 10 minutes. If any irritation persists, seek medical attention. In case of ingestion wash out mouth thoroughly and drink plenty of water. Do NOT induce vomiting. If any discomfort persists, seek medical attention. A Recommended maximum storage limit is 2 years.

PACKING : Available in 35 kg, 50 kg drum


 

Aquatreat-9200 L Oxygen Scavenger

DESCRIPTION AND USE : AQUATREAT-9200 L is a catalyzed oxygen scavenger for rapid and complete removal of oxygen from boiler water.AQUATREAT-9200 reacts with oxygen present in the boiler water thereby reducing oxygen corrosion. It contains a catalyst to ensure rapid reaction with oxygen. AQUATREAT-9200 is compatible with most chemicals used in boiler water treatment programmes.

GENERAL SPECIFICATIONS : Appearance: Off White colored solid powderpH : 10.0 min.Flammability: Non-flammable.

TREATMENT AND DOSAGE : A residual concentration. AQUATREAT-9200 is usually maintained in boiler water. Normally 1 mg/l of oxygen requires 10 mg/l of AQUATREAT-9200 for its removal. However, the right treatment level may vary depending on operating conditions like water characteristics, boiler pressure and feed water temperature. AQUATREAT-9200 is readily soluble in water. Proper feeding can be achieved by dissolving AQUATREAT-9200 in cold and clean water,in a covered tank, and introducing the prepared solution into the boiler with on line dosage pumps. Since the solution can absorb oxygen from the atmosphere, not more than one day’s requirement should be prepared at a time.

AQUATREAT-9200 is best fed to the boiler feed water pump outlet. In case of systems with deaerator the best point of feed is the deaerator outlet.

PRODUCT BENEFITS :

  • Readily soluble in water.
  • Quick and complete removal of D.O.
  • Simple control tests.

HANDLING AND STORAGE : Avoid contact with eyes or prolonged contact with skin. Do not take internally. In case of contact with skin, wash with plenty of water. Remove any contaminated clothing. Seek immediate medical attention In case of contact with eyes, flush with plenty of water and seek immediate medical attention. In case of ingestion wash mouth thoroughly and drink plenty of water. DO NOT induce vomiting. Seek immediate medical attention. Wear gloves and goggles wherever appropriate.

PACKING : Available in 50 kgs HDPE carboys or 200 liter HDPE barrels..


 

Fire Treat-9200 Oxygen Scavenger

DESCRIPTION AND USE : AQUATREAT-9200 is a catalyzed oxygen scavenger for rapid and complete removal of oxygen from boiler water.AQUATREAT-9200 reacts with oxygen present in the boiler water thereby reducing oxygen corrosion. It contains a catalyst to ensure rapid reaction with oxygen. AQUATREAT-9200 is compatible with most chemicals used in boiler water treatment program.

GENERAL SPECIFICATIONS : Appearance: Whitish To Pale Yellow liquidpH : Alkaline >9Flammability: Non-flammable.

TREATMENT AND DOSAGE : A residual concentration. AQUATREAT-9200 is usually maintained in boiler water. Normally 1 mg/l of oxygen requires 10 mg/l of AQUATREAT-9200 for its removal. However, the right treatment level may vary depending on operating conditions like water characteristics, boiler pressure and feed water temperature. AQUATREAT-9200 is readily soluble in water. Proper feeding can be achieved by dissolving AQUATREAT-9200 in cold and clean water, in a covered tank, and introducing the prepared solution into the boiler with on line dosage pumps.Since the solution can absorb oxygen from the atmosphere, not more than one day’s requirement should be prepared at a time.AQUATREAT-9200 is best fed to the boiler feed water pump outlet. In case of systems with deaerator the best point of feed is the deaerator outlet.

PRODUCT BENEFITS :

  • Readily soluble in water.
  • Quick and complete removal of D.O.
  • Simple control tests.

HANDLING AND STORAGE : Avoid contact with eyes or prolonged contact with skin. Do not take internally. In case of contact with skin, wash with plenty of water. Remove any contaminated clothing. Seek immediate medical attention In case of contact with eyes, flush with plenty of water and seek immediate medical attention. In case of ingestion wash mouth thoroughly and drink plenty of water. DO NOT induce vomiting. Seek immediate medical attention. Wear gloves and goggles wherever appropriate.

PACKING : Available in 50 kgs HDPE carboys or 200 liter HDPE barrels.


 

Aqua Treat 9205 Iron Sludge Conditioner

DESCRIPTION AND USE : Aquatreat 9205 is an iron sludge inhibitor, designed primarily for steam boilers. It is used to prevent the build-up of iron sludge and other metallic oxides, originating from corrosion of condensate systems. Aquatreat 9205 is based on a synergistic blend of dispersant, threshold inhibitor and sequestrant.

GENERAL SPECIFICATION:Appearance: Clear colorless to paleyellow liquidpH : 7.0 to 9.0Specific gravity: 1.0 to 1.1

TREATMENT AND DOSAGE : Aquatreat 9205 is normally maintained at concentrations between 50 and 100 mg/l in the boiler water. The correct treatment level for deposit prevention depends on operating conditions such as pH and the number of concentrations.The viscosity of Aquatreat 9205 allows it to be handled by conventional dosing pumps, without dilution, but it may be diluted if desired. Aquatreat 9205 is not corrosive to mild steel mixing tanks or dosages pumps in concentrated or in diluted form and may be pumped directly from the container using equipment in steel or plastic.

PRODUCT BENEFITS :

  • Inhibits iron sludge deposition.
  • Keeps metals in solution.
  • Disperses deposits.
  • May be dosed directly from the drum

POTENTIAL HAZARDS : This product is not considered to be hazardous, but as with all industrial chemicals care should be exercised during its use.

SPILL PROCEDURES : Spill may be flushed to drain with copious amount of water. Local regulations should be observed and the relevant authorities should be consulted before disposing of large spills.

HANDLING AND STORAGE :

  • Wear suitable gloves and eye/face protection.
  • Avoid contact with skin and eyes.
  • Avoid extremes of temperature.
  • Replace caps securely after use.
  • In case of contact with skin wash well with soap and water.
  • In case of contact with eyes wash immediately with plenty of water for at least 10 minutes.
  • If any irritation persists, seek medical attention.
  • In case of ingestion wash out mouth thoroughly and drink plenty of water.
  • Do NOT induce vomiting. If any discomfort persists, seek medical attention.
    Recommended maximum storage limit is 2 years.

PACKING : Available in 35 kg, 50 kg drums.


 

Aqua Treat-9208 Scale Sludge Conditioner

DESCRIPTION AND USE : AquaTreat 9208 is a synergistic blend of inorganic phosphate designed for the control of corrosion and scale in High pressure boiler internals. AquaTreat 9208 provides co-ordinate phosphate ratio of 2.6-2.8:1., for Boiler operating up to (2000 psig), 110 kg.cm2) The specific corrosion inhibitors in AquaTreat 9208 provide corrosion protection by the formation of a protective passive film on the metal surfaces.

GENERAL SPECIFICATIONS : Appearance: Clear yellow liquid.PH: 9.5-10.5Specific Gravity: 1.05 + 0.15

TREATMENT AND DOSAGE : AquaTreat 9208 can be dosed directly without dilution. Normally a phosphate reserve is maintained in the boiler water. The proper treatment levels vary with factors like boiler systems, operating conditions, boiler pressure and water characteristics. The product characteristics and viscosity permit easy feeding by on-line dosage pumps. The desired feeding mode is continuous injection to feed water.

PRODUCT BENEFITS :

  • Affords excellent corrosion protection.
  • Prevents deposition of hardness salts.
  • Ensures high mobility of phosphate sludge.
  • Good dispersion of suspended particulate matter
  • Simple control test.
  • Can be dosed directly without dilution.
  • Compatible with total water treatment programme.
  • Ready to use liquid blend.

HANDLING AND STORAGE : Avoid contact with eyes or prolonged contact with skin. DO NOT take internally. In case of contact with skin, wash with plenty of water. In case of contact with eyes, flush with plenty of water and seek immediate medical attention. In case of ingestion, wash mouth thoroughly and drink plenty of water. Do not induce vomiting and seek medical attention.Avoid extremes of temperature and wear gloves and goggles wherever appropriate.

PACKING : Available in 50-liter HDPE container


 

Aquatreat-9220 Single Blend Treatment

DESCRIPTION AND USE :
AQUATREAT-9220 is a liquid treatment based on a blend of tannins for use in steam raising and hot water boilers. AQUATREAT 9220 provides both corrosion protection and scale inhibition by scavenging oxygen, forming a protective film and disrupting crystal growth.

GENERAL SPECIFICATIONS : Appearance: Dark brown liquidpH as supplied: 4.5 to 6.5Specific gravity: 1.0 to 1.10AQUATREAT 9220 is normally dosed so as to maintain the boiler water at a tannin index (DM value) of 12 to 16. The correct treatment level depends on conditions such as operating pressure and the chemical composition of the feed water.

TREATMENT AND DOSAGE : AQUATREAT 9220 is normally diluted and injected by means of a dosage pot or a dosage pump, as appropriate to the particular plant. For injection by pump, AQUATREAT 9220 should be diluted ten times using clean water. AQUATREAT 9220 is not corrosive in concentrated or diluted form to steel mixing tanks or dosage pumps.

PRODUCT BENEFITS:

  • Tannate film protects metal surfaces.
  • Scavenges oxygen, protecting boiler and steam lines.
  • Inhibits scale formation.
  • Low toxicity product in liquid form, for ease of use.
  • Does not add to boiler water TDS, savings in blow down water losses and savings in associated Fuel energy losses.

POTENTIAL HAZARDS : This product is not considered to be hazardous, but, as with all industrial chemicals care should be exercised in its handling and use.

SPILL PROCEDURES : Flush to drain with copious amount of water, observing local regulations for effluent. The relevant authorities should be consulted before disposing of very large spills.

HANDLING AND STORAGE : Wear suitable gloves and eye/face protection. Avoid contact with skin and eyes. Avoid extremes of temperature. Replace caps securely after use. In case of contact with skin wash well with soap and water. In case of contact with eyes wash immediately with plenty of water for at least 10 minutes. If any irritation persists, seek medical attention. In case of ingestion wash out mouth thoroughly and drink plenty of water. Do NOT induce vomiting. If any discomfort persists, seek medical attention.Recommended maximum storage limit is 2 years. Replace caps securely after use.

PACKING : Available in 35 kg


 

Aquatreat-9225 Catalysed Oxygen Scavenger

DESCRIPTION AND USE : AquaTreat-9225 is a catalyzed oxygen scavenger for rapid and complete removal of Oxygen from boiler water. AquaTreat-9225 reacts with oxygen present in the boiler water thereby reducing oxygen corrosion. It contains a catalyst to ensure rapid reaction with oxygen. AquaTreat-9225 is compatible with most chemicals used in total boiler water treatment programmes.

GENERAL SPECIFICATIONS :
Appearance: Clear colorlessliquidpH : AlkalineSpecific Gravity: 0.95 – 1.05 Flammability: Non-flammable

TREATMENT AND DOSAGE : A residual concentration of AquaTreat-9225 is usually maintained in boiler water. The right treatment level may vary depending on operating conditions like water characteristics and boiler pressure. AquaTreat-9225 is readily soluble in water. It can be fed as such or diluted. Proper feeding can be achieved by introducing the product or prepared solution into the boiler with on-line dosage pumps.Solution if prepared, should be made in a covered tank. Since the solution can absorb oxygen from the atmosphere, not more than one day’s requirement should be prepared at a time. AquaTreat-9225 is best fed to the boiler feed water pump outlet. In case of systems with a deaerator the best point of feed is the deaerator outlet.

PRODUCT BENEFITS :

  • Ready and easy to use liquid
  • Excellent control of dissolved oxygen.
  • Do not add to the boiler TDS
  • Catalyst present ensures rapid and complete removal of D.O.

HANDLING AND STORAGE : Avoid contact with eyes or prolonged contact with skin. Do not take internally. In case of contact with skin, wash with plenty of water. Remove any contaminated clothing. Seek immediate medical attention In case of contact with eyes, flush with plenty of water and seek immediate medical attention. In case of ingestion wash mouth thoroughly and drink plenty of water. DO NOT induce vomiting. Seek immediate medical attention. Wear gloves and goggles wherever appropriate.

PACKING : Available in 50 kgs HDPE containers


 

Aqua Treat-9230 Oxygen Scavenger

DESCRIPTION AND USE : AquaTreat 9230 is a catalyzed oxygen scavenger for rapid and complete removal of Oxygen from boiler water. AquaTreat 9230 reacts with oxygen present in the boiler water thereby reducing oxygen corrosion. It contains a catalyst to ensure rapid reaction with oxygen. AquaTreat 9230 is compatible with most chemicals used in total boiler water treatment programmes. It removes oxygen even at ambient temperature and is a good metal passivator.

GENERAL SPECIFICATIONS : Appearance: Clear colourless to pale Yellow liquidpH : AlkalineSpecific Gravity: 0.95 – 1.00Flammability: Non-flammable

TREATMENT AND DOSAGE : A residual concentration of AquaTreat 9230 is usually maintained in boiler water. The right treatment level may vary depending on operating conditions like water characteristics and boiler pressure. AquaTreat 9230 is readily soluble in water. It can be fed as such or diluted. Proper feeding can be achieved by introducing the product or prepared solution into the boiler with on-line dosage pumps. Solution if prepared, should be made in a covered tank. Since the solution can absorb oxygen from the atmosphere, not more than one day’s requirement should be prepared at a time.AquaTreat 9230 is best fed to the boiler feed water pump outlet. In case of systems with a deaerator the best point of feed is the deaerator outlet.

PRODUCT BENEFITS :

  • Ready and easy to use liquid
  • Excellent control of dissolved oxygen.
  • Do not add to the boiler TDS
  • Catalyst present ensures rapid and complete removal of D.O.
  • Effective at ambient temperature
  • Good metal passivator
  • Is non toxic and non carcinogenic

HANDLING AND STORAGE : Avoid contact with eyes or prolonged contact with skin. Do not take internally. In case of contact with skin, wash with plenty of water. Remove any contaminated clothing. Seek immediate medical attention In case of contact with eyes, flush with plenty of water and seek immediate medical attention. In case of ingestion wash mouth thoroughly and drink plenty of water. DO NOT induce vomiting. Seek immediate medical attention. Wear gloves and goggles wherever appropriate.

PACKING :
Available in 50 kgs HDPE containers.


 

Aqua Treat-9240 Oxygen Scavenger

DESCRIPTION AND USE : AquaTreat 9240 is a catalyzed oxygen scavenger for rapid and complete removal of Oxygen from boiler water. AquaTreat 9240 reacts with oxygen present in the boiler water thereby reducing oxygen corrosion. It contains a catalyst to ensure rapid reaction with oxygen. AquaTreat 9240 is compatible with most chemicals used in total boiler water treatment programme. It removes oxygen even at ambient temperature and is a good metal passivator. It also functions as a neutralising agent.

GENERAL SPECIFICATIONS : Appearance: Clear colourless to pale Yellow liquidpH : AlkalineSpecific Gravity: 0.92 – 1.00Flammability: Non-flammable

TREATMENT AND DOSAGE : A residual concentration of AquaTreat 9240 is usually maintained in boiler water. The right treatment level may vary depending on operating conditions like water characteristics and boiler pressure. Usualy 0.02 to 0.07 ppm residual is maintained in boiler feed water. AquaTreat 9240 is readily soluble in water. It can be fed as such or diluted. Proper feeding can be achieved by introducing the product or prepared solution into the boiler with on-line dosage pumps.Solution if prepared should be made in a covered tank. Since the solution can absorb oxygen from the atmosphere, not more than one day’s requirement should be prepared at a time.AquaTreat 9240 is best fed to the boiler feed water pump outlet. In case of systems with a de-aerator the best point of feed is the de-aerator outlet.

PRODUCT BENEFITS :

  • Ready and easy to use liquid
  • Excellent control of dissolved oxygen.
  • Do not add to the boiler TDS
  • Catalyst present ensures rapid and complete removal of D.O.
  • Good metal passivator
  • Condensate line protection
  • Is non toxic and non carcinogenic

HANDLING AND STORAGE : Avoid contact with eyes or prolonged contact with skin. Do not take internally. In case of contact with skin, wash with plenty of water. Remove any contaminated clothing. Seek immediate medical attention In case of contact with eyes, flush with plenty of water and seek immediate medical attention. In case of ingestion wash mouththoroughly and drink plenty of water. DO NOT induce vomiting. Seek immediate medical attention. Wear gloves and goggles wherever appropriate.

PACKING : Available in 50 kgs HDPE containers.


 

Aqua Treat-9241 Catalysed Oxygen Scavenger

DESCRIPTION AND USE : Aquatreat 9241 is a catalyzed oxygen scavenger for rapid and complete removal of Oxygen from boiler water. Aquatreat 9241 reacts with oxygen present in the boiler water thereby reducing oxygen corrosion. It contains a catalyst to ensure rapid reaction with oxygen. Aquatreat 9241 is compatible with most chemicals used in total boiler water treatment programmes. It removes oxygen even at ambient temperature and is a good metal passivator. It also functions as a neutralizing agent.

TREATMENT AND DOSAGE : A residual concentration of Aquatreat 9241 is usually maintained in boiler water.The right treatment level may vary depending on operating conditions like water characteristics and boiler pressure. WEX shall recommend the optimum treatment level for individual installations.Aquatreat 9241 is readily soluble in water. It can be fed as such or diluted. Proper feeding can be achieved by introducing the product or prepared solution into the boiler with on-line dosage pumps.Solution if prepared should be made in a covered tank. Since the solution can absorb oxygen from the atmosphere, not more than one day’s requirement should be prepared at a time. Aquatreat 9241 is best fed to the boiler feed water pump outlet. In case of systems with a deaerator the best point of feed is the deaerator outlet. 

HANDLING AND STORAGE : Avoid contact with eyes or prolonged contact with skin. Do not take internally. In case of contact with skin, wash with plenty of water. Remove any contaminated clothing. Seek immediate medical attention In case of contact with eyes, flush with plenty of water and seek immediate medical attention. In case of ingestion wash mouth thoroughly and drink plenty of water. DO NOT induce vomiting. Seek immediate medical attention. Wear gloves and goggles wherever appropriate. 


 

Aquatreat-9280 Boiler Water Treatment Chemicals

Aquatreat-9280 Deposit Control Agent
DESCRIPTION AND USE :
AquaTreat-9280 is based on an inorganic polyphosphate and is used for boilers of any pressure to precipitate calcium hardness as mobile phosphate sludge.AquaTreat-9280 delays the precipitation of hardness salts in feed lines. It may be injected continuously to feed water-containing hardness salts without the formation of excessive scales in the boiler drum.

TREATMENT AND DOSAGE : A phosphate reserve is normally maintained in the boiler water, within set limits. The correct treatment level depends on operating conditions such as boiler pressure and on the chemical characteristics of the water employed. The optimum treatment level for any plant will be specified by WEX. The treatment may be injected using a dosage pump or a dosage pot as appropriate to a particular installation. Solution viscosity permits handling by conventional dosage pumps without dilution, but it may be diluted if desired (preferably using softened water or condensate).AquaTreat-9280 is not corrosive to steel mixing tanks or dosage pumps in concentrated or dilute form. 

HANDLING AND STORAGE : Avoid contact with skin and eyes. In case of contact with skin wash affected area immediately with clean water for at least 10 minutes. In case of contact with eyes irrigate thoroughly with clean water for at least 10 minutes. Seek medical attention if irritation persists. In case of ingestion wash out mouth thoroughly and drink plenty of water. DO NOT induce vomiting. Seek immediate medical attention. Remove any contaminated clothing. Wear suitable gloves and eye/face protection.Replace caps securely after use. Recommended maximum storage limit is 2 years.


 

Aqua Treat-9410 Single Blend Treatment

DESCRIPTION AND USE : AQUATREAT-9410 is based on catalyzed sulphite, anti-precipitants, sludge conditioners and an alkalinity builder. This, easy to control composite water treatment product is specially formulated for low capacity steam generation. AQUATREAT-9410 combines the functions of rapid oxygen scavenging, deposition control and alkalinity control in a single, stable product.

TREATMENT AND DOSAGE : AQUATREAT-9410 should be dosed continuously into the feed. The dosage rate is based on the dissolved oxygen content of the feed water and will vary according to the feed temperature. WEX will determine the effective dosage rate and establish control procedures. 

PRODUCT BENEFITS :

  • Corrosion, Scale and alkalinity control in a single product. 
  • Liquid product for ease of application.
  • Rapid oxygen scavenging, protecting the critical first section of the steam-generating coil of coil type boiler.
  • Maintains clean, efficient, heat transfer surfaces.
  • Single, all in one product for coil type boilers. 

HANDLING AND STORAGE :Avoid contact with skin and eyes. Do not take internally. In case of contact with skin, wash with plenty of water. Remove any contaminated clothing. Seek immediate medical attention In case of contact with eyes, flush with plenty of water and seek immediate medical attention. In case of ingestion wash mouth thoroughly and drink plenty of water. DO NOT induce vomiting. Seek immediate medical attention. Wear gloves and goggles wherever appropriate.Avoid extremes of temperature.Replace caps securely after use.When using a dosage tank make fresh solutions daily.Recommended maximum storage limit is 1 year.


 

Aquatreat 9510 Single Blend Treatment

DESCRIPTION AND USE : AQUATREAT 9510 is based on catalyzed sulphite, anti-precipitants, sludge conditioners and an alkalinity builder. This, easy to control composite water treatment product is specially formulated for low capacity steam generation.AQUATREAT 9510 combines the functions of rapid oxygen scavenging, deposition control and alkalinity control in a single, stable product.

TREATMENT AND DOSAGE : AQUATREAT 9510 should be dosed continuously into the feed. The dosage rate is based on the dissolved oxygen content of the feed water and will vary according to the feed temperature. WEX will determine the effective dosage rate and establish control procedures. 

HANDLING AND STORAGE :

  • Avoid contact with skin and eyes.
  • Do not take internally.
  • In case of contact with skin, wash with plenty of water.
  • Remove any contaminated clothing. Seek immediate medical attention In case of contact with eyes, flush with plenty of water and seek immediate medical attention.
  • In case of ingestion wash mouth thoroughly and drink plenty of water.
  • DO NOT induce vomiting. Seek immediate medical attention.
  • Wear gloves and goggles wherever appropriate.
  • Avoid extremes of temperature.
  • Replace caps securely after use.
  • When using a dosage tank make fresh solutions daily.
  • Recommended maximum storage limit is 1 year.

 

Aquatreat-9750 Anti Foaming Agent

DESCRIPTION AND USE : AQUATREAT-9750 is a liquid boiler water antifoam treatment for use in feed waters to control foaming in boilers. AQUATREAT-9750 can be used in feed waters for boilers operating at pressures up to 117 Kg/cm2. AQUATREAT-9750 will control carry-over due to foaming, thus producing higher purity steam which will result in cleaner turbines and cleaner condensing surfaces of process equipment, dryers and condensers.

TREATMENT AND DOSAGE : AQUATREAT-9750 is only a supplemental product to be used for treatment of boiler water foaming. Many instances of boiler water carryover/steam contamination are eventually traced to mechanical or operational causes rather than actual boiler water foaming. High levels of solids in the steam can result from excessive load swings, malfunctioning or disoriented steam drum internals, inaccurate steam drum level control and contamination of attemperation water.Dosage will vary with the severity of the problem. AQUATREAT-9750 can be used:1. When insufficient antifoam is available from internal treatment products.2. Where supplemental antifoam is desired for short-term use during steam purity studies. The maximum amount of AQUATREAT 9750 in the feed water should be 2-5 ppm. 

FEEDING :

  1. AQUATREAT-9750 must be fed continuously to the feed water to reduce boiler water foaming.
  2. AQUATREAT-9750 should be fed neat. If the calculated feed rate for AQUATREAT-9750 is below 2 litres per day, then dilution by 2 to 20% is recommended.
  3. AQUATREAT-9750 cannot be mixed with other products because the resultant solution will separate and/or be inactive.
  4. Entrance to the feed water line must be via a stainless steel quill extending beyond the internal surface of the feed water line.

HANDLING AND STORAGE : Avoid contact with eyes or prolonged contact with skin. DO NOT take internally. In case of contact with skin, wash with plenty of water. In case of contact with eyes, flush with plenty of water and seek immediate medical attention. In case of ingestion, wash mouth thoroughly and drink plenty of water. Do not induce vomiting and seek medical attention.Avoid extremes of temperature and wear gloves and goggles wherever appropriate.


 

Fire Treat-b - 9340 All Volatile Treatment Chemicals

DESCRIPTION AND USE : Aquatreat-B-9340 is an effective and efficient alkalinity builder, neutralizing amine, oxygen scavenger used in boiler for preventing corrosion in DM water storage tank, de-aerator, boiler drum and boiler steam condensate lines. AquaTreat-B-9340 distribution ratio is better than that of morpholine, ammonia and other similar amines and therefore its efficiency of neutralizing aqueous solutions containing CO2 is better. Aquatreat-B-9340 is a corrosion inhibitor designed for use in steam and condensate systems. It can be used at steam pressures up to 163 bar (2400 psig) and temperatures up to 590ºC. Aquatreat-B-9340 provides effective neutralisation of acidic gases, such as CO2, in the near end of a condensate system. Aquatreat-B-9340 reduces corrosion and formation of iron bearing deposits.

TREATMENT AND DOSAGE : Aquatreat-B-9340 dosage depends upon the feed water quality and boiler operating parameters. In general 5-7 ppm of the product is adequate in the make up water initially. The product should be dosed into the feed water on continuous basis. Aquatreat-B-9340 is compatible with all conventional boiler feed water treatment chemicals like TSP and non-conventional treatment chemicals as well.WEX will provide technical assistance in optimizing the use level for your operating conditions. 

HANDLING AND STORAGE : Avoid contact with skin and eyes. Wash contact area with plenty of fresh water and seek medical attention. Incase of contact with eyes wash thoroughly with clean water for at least 10 minutes. Cover with sterile eye pad and seekmediate medical attention. Incase of ingestion wash mouth thoroughly with water and drink plenty of water. DO NOT INDUCE VOMITING. Seek medical attention.


 

Aqua Treat- Msf-9 Antiscalant For Multistage Flash Distillat

DESCRIPTION AND USE :Aqua Treat- MSF -9 is a high performance liquid product for the control of scaling and particulate fouling in seawater multistage flash distillation plants. It is synergistic blend of chelants, sequestrants and polycarboxylates.AquaTreat- MSF -9 is developed with powerful chelants and dispersants to give improved control of fouling through out the plant. It also reduces cleaning frequencies.AquaTreat- MSF -9 is effective against alkaline scale formation across the full range of top brine temperature (TBT) in use today. It is particularly recommended for use in plants operating at temperature greater than 100 0 C where total control of particulate fouling and sludging is critical for maintaining thermal efficiency.

APPLICATION AND DOSAGE :
AquaTreat- MSF -9 is an aqueous solution and is corrosive in its concentrated form.Corrosion resistant equipment must be used for dosing of the product. Recommended injection points are either in to sea water make up line after any external deaeration and decarbonation equipment, or into the recycle stream.AquaTreat- MSF -9 is completely soluble in water. It may be dosed as neat product or as a solution and should be dosed continuously at specified dosages.The dose level depends up on quality of sea water, TBT, recycle brine concentration factor, type of distillation and cleaning frequency. Typical dose levels are 1.5 – 2.0 ppm.WEX TECH. representative will help you to select the most optimum dosage for your system. It is non-toxic and non-polluting at use levels.

HANDLING AND STORAGE :

  • Avoid contact with eyes and prolonged contact with skin.
  • Do not take internally.
  • In case of contact with eyes, flush with ample water and get prompt medical attention.
  • Gloves and goggles should be used where appropriate.
  • AquaTreat- MSF-9 containers should be stored airtight under shade and away from direct sunlight.

 

Fire Treat-90 Fuel Additive

DESCRIPTION AND USE : FireTreat 90 series is designed keeping in mind the typical fuel oil related problems and overall improvement in fuel economy. Use of Fire- treat helps to improve the overall combustion efficiency of Fuel. FireTreat 90 series helps in reduction of soot formation and suspended particulate matter emission for cleaner environment and also ensures reduction in oil sludge, prevention of corrosion in oil storage tank and pipelines.

TREATMENT AND DOSAGE : FireTreat 90 series is a combination of dispersant, emulsifiers, acid neutralizers and Iron based combustion’s catalysts.FireTreat 90 series is directly added into the oil storage tank during bulk unloading. In case re-circulation facility is available to this tank, slug dosing is also recommended. Depending upon type of fuel oil in use, following dosages of FireTreat 90 series are normally recommended. Our engineers however, shall assist in determining the exact dosage depending upon the problems being faced and the system in use. 

HANDLING :

  • FireTreat 90 series containers should be stored in a cool and dry area.
  • Avoid contact with skin and eyes.
  • Do not take internally.
  • In case of contact with skin and eyes, flush the contact area with plenty of water and seek medical attention.
  • During handling wear rubber gloves and goggles.
  • In case of ingestion get prompt medical attention. 

Fire Treat- 9723 Fireside Treatment Chemical

DESCRIPTION AND USE : FUELTREAT-9723 is a product for use in boilers using either oil or solid fuel.FUELTREAT- 9723 reduces smut emission, soot deposits, and corrosion and slagging in the boilers.The environmental nuisance of smut emission is greatly reduced or even eliminated.

TREATMENT AND DOSAGE : FUELTREAT-9723 should be applied to the furnace as a shot dose, once or twice a day. Continuous application is not desirable. The period between treatments should only be greater than 24 hours in very small installations.Regular dose is one part FUELTREAT 9723 to 10000 parts of fuel, by weight. 

HANDLING AND STORAGE : 
Wear suitable gloves and eye/face protection. Avoid contact with skin and eyes. Do not breathe dust. In case of contact with skin wash affected area immediately with water for at-least 10 minutes. Remove any contaminated clothing. In severe cases seek medical attention. In case of contact with eyes irrigate thoroughly with clean water for at-least 10 minutes. Cover affected eye with sterile eye pad if possible. Seek immediate medical attention. In case of ingestion, wash out mouth thoroughly with water. Slowly sip water whilst resting. DO NOT induce vomiting. Seek medical attention In case of inhalation remove from exposure, rest and keep warm. In severe cases or where exposure has been great seeking medical attention recommended maximum storage limit is 2 years.


 

Fuel Treat 9f Fire Side Additive

DESCRIPTION AND USE : FUELTREAT 9F is a product for use in boilers using either oil or solid fuel.FUELTREAT 9F reduces smut emission, soot deposits, and corrosion and slagging in the boilers.The environmental nuisance of smut emission is greatly reduced or even eliminated.

TREATMENT AND DOSAGE : FUELTREAT 9F should be applied to the furnace as a shot dose, once or twice a day. Continuous application is not desirable. The period between treatments should only be greater than 24 hours in very small installations.The dose is normally one part FUELTREAT 9F to 10000 parts of fuel, by weight. 

HANDLING AND STORAGE :

  • Avoid contact with skin and eyes.
  • Do not breathe dust In case of contact with skin wash affected area immediately with water for at-least 10 minutes.
  • Remove any contaminated clothing.
  • In severe cases seek medical attention.
  • In case of contact with eyes irrigate thoroughly with clean water for at least 10 minutes.
  • Cover affected eye with sterile eye pad. If possible, seek immediate medical attention.
  • In case of ingestion wash out mouth thoroughly with water. Slowly sip water whilst resting.
  • DO NOT induce vomiting. Seek medical attention.
  • In case of inhalation remove from exposure, rest and keep warm. In severe cases or where exposure has been great seek medical attention.
  • Recommended maximum storage limit is 2 years.

Firetreat-9b Fireside Additive

DESCRIPTION AND USE : FIRETREAT-9B is a product for use in boilers using either oil or solid fuel.FIRETREAT-9B reduces smut emission, soot deposits, corrosion and slagging in the boilers.The environmental nuisance of smut emission is greatly reduced or even eliminated.

TREATMENT AND DOSAGE :FIRETREAT-9B should be applied to the furnace as a shot dose, once or twice a day. Continuous application is not desirable. The period between treatments should only be greater than 24 hours in very small installations. 

PRODUCT BENEFITS :

  • Reduces soot deposits and smut emission.
  • Minimizes fireside corrosion.
  • Reduces slagging.
  • May be introduced to a fouled boiler to soften fireside deposits. 

HANDLING AND STORAGE :

  • Wear suitable gloves and eye/face protection.
  • Avoid contact with skin and eyes.
  • Do not breathe dust.
  • In case of contact with skin wash affected area immediately with water for at least 10 minutes.
  • Remove any contaminated clothing.
  • In severe cases seek medical attention.
  • In case of contact with eyes irrigate thoroughly with clean water for at least 10 minutes.
  • Cover affected eye with sterile eye pad if possible. Seek immediate medical attention.
  • In case of ingestion, wash out mouth thoroughly with water.
  • Slowly sip water whilst resting.
  • DO NOT induce vomiting. Seek medical attention.
  • In case of inhalation remove from exposure, rest and keep warm.
  • In severe cases or where exposure has been great seek medical attention Recommended maximum storage limit is 2 years.

Firetreat 9720 Fire side Treatment Chemical

DESCRIPTION AND USE : FIRETREAT 9F is a product for use in boilers using either oil or solid fuel.FIRETREAT 9F reduces smut emission, soot deposits, and corrosion and slagging in the boilers. The environmental nuisance of smut emission is greatly reduced or even eliminated.

TREATMENT AND DOSAGE : FIRETREAT 9F should be applied to the furnace as a shot dose, once or twice a day. Continuous application is not desirable. The period between treatments should only be greater than 24 hours in very small installations.The dose is normally one part FIRETREAT 9F to 10000 parts of fuel, by weight. 

HANDLING AND STORAGE :

  • Wear suitable gloves and eye/face protection.
  • Avoid contact with skin and eyes.
  • Do not breathe dust.
  • In case of contact with skin wash affected area immediately with water for at least 10 minutes.
  • Remove any contaminated clothing.
  • In severe cases seek medical attention.
  • In case of contact with eyes irrigate thoroughly with clean water for atleast 10 minutes.
  • Cover affected eye with sterile eye pad if possible. Seek immediate medical attention.
  • In case of ingestion, wash out mouth thoroughly with water. Slowly sip water whilst resting.
  • DO NOT induce vomiting. Seek medical attention.
  • In case of inhalation remove from exposure, rest and keep warm.
  • In severe cases or where exposure has been great seek medical attention Recommended maximum storage limit is 2 years.

Fuel Treat-FM Fuel Additive

DESCRIPTION AND USE : Fueltreat-FM is designed keeping in mind the typical fuel oil related problems and overall improvement in fuel economy. Use of Fueltreat-FM helps improve the overall combustion efficiency of Fuel. Fueltreat-FM helps in reduction of soot formation and suspended particulate matter emission for cleaner environment and also ensures reduction in oil sludge, prevention of corrosion in oil storage tank and pipelines.

TREATMENT AND DOSAGE : Fueltreat-FM is a combination of dispersant, emulsifiers, acid neutralizers and Iron based combustion’s catalysts.Fueltreat-FM is directly added into the oil storage tank during bulk unloading. In case re-circulation facility is available to this tank, slug dosing is also recommended. Depending upon type of fuel oil in use, following dosages of Fueltreat-FM are normally recommended. Our engineers however, shall assist in determining the exact dosage depending upon the problems being faced and the system in use. 

PRODUCT BENEFITS :

  1. Oil sludge reduction and fuel stabilization.
  2. Corrosion prevention in oil storage tank and pipelines.
  3. Dispersion of existing deposits and subsequent combustion in burner system.
  4. Reduction in sludge keeps burner nozzles clean thus ensuring improved atomization and elimination of coke formation.
  5. Improved fuel economy and boiler efficiency as no soot formation and reduced suspended particulate matter emission, improved stack emission.
  6. Corrosion prevention ensures enhanced life of equipment like storage tanks, pumps, valves and filters etc. 
HANDLING :
  • Fueltreat-FM containers should be stored in a cool and dry area.
  • Avoid contact with skin and eyes.
  • Do not take internally.
  • In case of contact with skin and eyes, flush the contact area with plenty of water and seek medical attention.
  • During handling wear rubber gloves and goggles.
  • In case of ingestion get prompt medical attention. 

Firetreat - 90 Sl Fuel Additive

DESCRIPTION AND USE : FireTreat 90SL series is designed keeping in mind the typical fuel oil related problems and overall improvement in fuel economy. Use of Firetreat 90SL helps to improve the overall combustion efficiency of Fuel. FireTreat 90SL helps in reduction of soot formation, and suspended particulate matter emission. FireTreat 90SL also ensures reduction in oil sludge, prevention of corrosion in oil storage tank and pipe lines.

TREATMENT AND DOSAGE : FireTreat 90SL is directly added into the oil storage tank during bulk unloading. In case re-circulation facility is available to this tank, slug dosing is also recommended. Depending upon type of fuel oil in use, following dosages of FireTreat 90SL are normally recommended Our engineers however, shall assist in determining the exact dosage depending upon the problems being faced and the system in use. 

PRODUCT BENEFITS : 1. Oil sludge reduction and fuel stabilization.2. Corrosion prevention in oil storage tank and pipelines.3. Dispersion of existing deposits and subsequent combustion in burner system.4. Reduction in sludge keeps burner nozzles clean thus ensuring improved atomisation and elimination of coke formation.5. Improved fuel economy and boiler efficiency as no soot formation and reduced suspended particulate matter emission, improved stack emission.6. Corrosion prevention ensures enhanced life of equipment like storage tanks, pumps, valves and filters etc.

HANDLING :

  • FireTreat 90 SL series containers should be stored in a cool and dry area.
  • Avoid contact with skin and eyes.
  • Do not take internally.
  • In case of contact with skin and eyes, flush the contact area with plenty of water and seek medical attention.
  • During handling wear rubber gloves and goggles. In case of ingestion get prompt medical attention.

Fuel Treat-9724 Fire Side Treatment Chemicals

QA1`DESCRIPTION AND USE : FUELTREAT-9724 is a product for use in boilers using either oil or solid fuel.FUELTREAT-9724 reduces smut emission, soot deposits, and corrosion and slagging in the boilers.The environmental nuisance of smut emission is greatly reduced or even eliminated.

TREATMENT AND DOSAGE : FUELTREAT-9724 should be applied to the furnace as a shot dose, once or twice a day. Continuous application is not desirable. The period between treatments should only be greater than 24 hours in very small installations. The dose is normally one part FUELTREAT-9722 is 10000 parts of fuel, by weight.

PRODUCT BENEFITS : Reduces soot deposits and smut emission. Minimizes fireside corrosion.Reduces slagging.May be introduced to a fouled boiler to soften fireside deposits. 

HANDLING AND STORAGE : Wear suitable gloves and eye/face protection. Avoid contact with skin and eyes. Do not breathe dust. In case of contact with skin wash affected area immediately with water for at-least 10 minutes. Remove any contaminated clothing. In severe cases seek medical attention. In case of contact with eyes irrigate thoroughly with clean water for at-least 10 minutes. Cover affected eye with sterile eye pad if possible. Seek immediate medical attention. In case of ingestion, wash out mouth thoroughly with water. Slowly sip water whilst resting. DO NOT induce vomiting. Seek medical attention In case of inhalation remove from exposure, rest and keep warm. In severe cases or where exposure has been great seeking medical attention recommended maximum storage limit is 2 years.


Fuel Treat-mg Fuel Additive

DESCRIPTION AND USE : Fueltreat MG is designed keeping in mind the typical fuel oil related problems and overall improvement in fuel economy. Use of Fueltreat helps improve the overall combustion efficiency of Fuel. Fueltreat MG helps in reduction of soot formation and suspended particulate matter emission for cleaner environment and also ensures reduction in oil sludge, prevention of corrosion in oil storage tank and pipelines.

PRODUCT BENEFITS : Oil sludge reduction and fuel stabilization. Corrosion prevention in oil storage tank and pipelines. Dispersion of existing deposits and subsequent combustion in burner system.Reduction in sludge keeps burner nozzles clean thus ensuring improved atomization and elimination of coke formation.Improved fuel economy and boiler efficiency as no soot formation and reduced suspended particulate matter emission, improved stack emission.Corrosion prevention ensures enhanced life of equipment like storage tanks, pumps, valves and filters etc. 

TREATMENT AND DOSAGE : Fueltreat-MG is a combination of dispersant, emulsifiers, acid neutralizers and Magnesium based combustion’s catalysts.Fueltreat -MG is directly added into the oil storage tank during bulk unloading. In case re-circulation facility is available to this tank, slug dosing is also recommended. Depending upon type of fuel oil in use, following dosages of Fueltreat -MG are normally recommended. Our engineers however, shall assist in determining the exact dosage depending upon the problems being faced and the system in use. 

HANDLING :

  • Fueltreat -MG containers should be stored in a cool and dry area.
  • Avoid contact with skin and eyes.
  • Do not take internally
  • In case of contact with skin and eyes, flush the contact area with plenty of water and seek medical attention.
  • During handling wear rubber gloves and goggles. In case of ingestion get prompt medical attention.